Nexperia - PEMI8CSP-RW-P

Wurth Elektronik 7427927161 is a FERRITE CHIP filter with 2 terminals, rated for 0.51A current. It operates b/w -55 to 125 °C and has a max DC resistance of 0.56 ohm. Ideal for data line filtering in surface mount applications due to its compact dimensions of L1.0xB0.5xH0.5 mm.

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .08 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1.5 A;

Taiyo Yuden's FBMH3225HM601NT8 is a Ferrite Chip Data Line Filter with 2 terminals, 600 Ohm output impedance, and 3A rated current. It operates b/w -40°C to 125°C, measures 3.2mm in length, and is ideal for surface mount applications requiring noise suppression in electronic circuits.

Murata Manufacturing's BLM18KG121TN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.6mm, it offers a max DC resistance of 0.03 ohm and output impedance of 120 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 3A and is commonly used in electronic devices requiring noise suppression on data lines.

FBMJ2125HS420-TV by Taiyo Yuden is a ferrite chip data line filter with dimensions of L2.0XB1.25XH0.85 (mm). It has a max operating temperature of 125 °C and a min operating temperature of -40 °C. This filter is suitable for surface mount applications and has a rated current of 4 A.

Murata Manufacturing's BLM18EG471SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of 1.6x0.8x0.8 mm, it offers a max frequency of 1000 MHz and DC resistance of 0.21 ohm. Ideal for surface mount applications in electronics requiring impedance control up to 550 OHM at frequencies ranging from 100 MHz to 1000 MHz.

Murata's BLM18PG121SN1D is a chip bead data line filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, offering 120 ohm impedance at 100MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.

TPD8F003DQDR by Texas Instruments is a data line filter with 8 functions and 16 terminals. It operates b/w -40°C to 85°C, with a max DC resistance of 115 ohm. This surface mount device is ideal for IEC-approved applications requiring high capacitance and compact dimensions.

Wurth Elektronik 744232102 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has 4 terminals, DC resistance of 1 ohm, and output impedance of 1000 ohm. Ideal for applications requiring noise filtering in data lines with a current rating of 0.23A.

TDK's MPZ1608S101A is a FERRITE CHIP filter with 2 terminals, rated for 3A current. It offers low DC resistance of 0.03 ohm and output impedance of 100 ohm. Ideal for data line filtering applications due to its compact size (1.6x0.8x0.6mm) and surface mounting type.

Wurth Elektronik 744220203 is a Data Line Filter with 2 functions and rated voltage of 80V. It has inductance of 20000uH, max operating temp of 125°C, and DC resistance of 2.6 ohm. Ideal for applications requiring noise suppression in data lines with approval from IEC standards.

FBMH4532HM132-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, rated for 3A current. Featuring ferrite construction, it offers an output impedance of 1300Ω and operates b/w -40°C to 85°C. Ideal for surface mount applications, this filter measures L4.5xB3.2xH3.2mm and is designed for frequencies ranging from 100MHz with a max DC resistance of 0.06Ω.

TDK's ACT1210L-101-2P-TL00 is a Data Line Filter with 10 Mohm Min Insulation Resistance, 80V Rated Voltage, and 100uH Inductance. Ideal for applications requiring noise suppression in data lines while operating within -40 to 125 °C temperature range.

Taiyo Yuden's FCFBMH3225HM601NT is a Ferrite Chip Data Line Filter with 2 terminals, 600 OHM output impedance, and 3A rated current. Ideal for surface mount applications, it operates b/w -40°C to 85°C and has a compact size of L3.2xB2.5xH2.5mm.

PA3747.905NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. It operates b/w -40 to 125 °C and has an inductance of 6030 uH. Ideal for applications requiring high output impedance and rated current of 1.45 A.

TE Connectivity's BMB2A0300LN2 is a 0805 case FERRITE CHIP filter with 300 OHM output impedance, 0.15 ohm DC resistance, and 0.6 A rated current. Ideal for data line filtering applications, this multilayer chip operates b/w -55 to 125 °C at frequencies ranging from 100 MHz.

FERRITE CHIP; Construction: Chip; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;

Pulse Electronics P0502NLT is a Data Line Filter with 2 functions, AEC-Q200 screening. It has inductance of 470uH, max operating temp of 120°C, and rated current of 14A. Ideal for automotive applications due to its surface mounting type and compact dimensions (L30.99xB25.4xH12.7 mm).

The TDK MPZ2012S102AT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a DC resistance of 0.15 ohm, suitable for applications requiring output impedance of 1000 OHM at frequencies ranging from 100 MHz.

Wurth Elektronik 742792631 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 240 ohm at frequencies ranging from 100 MHz to 400 MHz. Ideal for surface mounting, it has a DC resistance of 0.4 ohm and rated current of 0.2 A.