Nexperia - PESD3USB3SZ

  1. Home
  2. Nexperia - PESD3USB3SZ
PESD3USB3SZ by Nexperia

Image shown is a representation only.

Manufacturer Nexperia
Manufacturer's Part Number PESD3USB3SZ
Description DATA LINE FILTER; Rated Current: 8 A; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Width (mm): 1.22; No. of Functions: 3;
Datasheet PESD3USB3SZ Datasheet
NAME DESCRIPTION
Width (mm): 1.22
Dimensions: L2.42XB1.22XH0.6 (mm)/L0.095XB0.048XH0.024 (inch)
Approvals (V): IEC
Mounting Type: SURFACE MOUNT
Minimum Operating Temperature: -40 Cel
Rated Voltage: 5 V
No. of Functions: 3
No. of Terminals: 5
Length: 2.42 mm
Capacitance: .45 uF
Filter Type: DATA LINE FILTER
Maximum Operating Temperature: 85 Cel
Rated Current: 8 A
Height: .6 mm
Plant 5!
Your quote plants 5 trees.

Popular Products

Category Top Products

MMZ1608A252BTA00 by TDK

MMZ1608A252BTA00

TDK

The TDK MMZ1608A252BTA00 is a chip bead data line filter with 2 terminals, rated for 0.2A current and offering 2500 ohm output impedance. With dimensions of 1.6x0.8x0.8mm, it's ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities up to temperatures of 125°C.
7427932 by Wuerth Elektronik & Kg

7427932

Wuerth Elektronik & Kg

Wurth Elektronik 7427932 is a chip data line filter with 2 terminals, Ferrite Bead type, and 125°C max operating temp. Ideal for IEC-approved applications requiring filtering at frequencies b/w 25-100 MHz with low DC resistance of 0.0009 ohm. Suitable for surface mount installation in compact spaces due to its dimensions of L7.8xB4.75xH3.0 mm.
742792711 by Wuerth Elektronik & Kg

742792711

Wuerth Elektronik & Kg

Wurth Elektronik 742792711 is a FERRITE CHIP Data Line Filter with max operating temp of 125°C and min of -55°C. It has a width of 0.5mm, length of 1mm, and output impedance of 100Ω. Ideal for surface mount applications in electronics to reduce noise interference on data lines.
EMI4192MTTAG by Onsemi

EMI4192MTTAG

Onsemi

EMI4192MTTAG by Onsemi is a Data Line Filter with 2 functions and 10 terminals. It has a max operating temperature of 85°C, DC resistance of 5 ohm, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a capacitance of 1.3 uF in plastic/epoxy packages.
BLM21BB201SN1D by Murata Manufacturing

BLM21BB201SN1D

Murata Manufacturing

BLM21BB201SN1D by Murata is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.26 ohm, and output impedance of 200 ohm at 100 MHz. Widely used in data line applications for noise suppression due to its ferrite material and compact dimensions of L2.0xB1.25xH0.85 mm.
HI0805R800R-10 by Steward

HI0805R800R-10

Steward

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: 5 A;
1250F-003 by Spectrum Control

1250F-003

Spectrum Control

DATA LINE FILTER; Maximum DC Resistance: .01 ohm; Rated Current: 10 A; Rated Voltage: 200 V; No. of Functions: 1; Additional Features: PI-TYPE CIRCUIT;
SRF0905-500Y by Bourns

SRF0905-500Y

Bourns

Bourns SRF0905-500Y is a Data Line Filter with 2 functions, rated at 50V. Featuring an inductance of 50uH and max DC resistance of 0.32 ohm, it operates b/w -40 to 105°C. Ideal for applications requiring a surface mount filter with dimensions of L9.2xB6.0xH5.0mm, such as data transmission systems or electronic devices needing noise suppression.
742792731 by Wuerth Elektronik & Kg

742792731

Wuerth Elektronik & Kg

Wurth Elektronik 742792731 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temp of 125°C and min of -55°C. With dimensions of L1.0xB0.5xH0.5 (mm), it's ideal for surface mount applications requiring a rated current of 1.2A and output impedance of 100Ω.
BL01RN1A1D2B by Murata Manufacturing

BL01RN1A1D2B

Murata Manufacturing

Murata BL01RN1A1D2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range. Through-hole mount, D3.6xH5.0mm dimensions make it ideal for noise suppression in electronic circuits.
BLM18RK121SN1D by Murata Manufacturing

BLM18RK121SN1D

Murata Manufacturing

Murata Manufacturing's BLM18RK121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.25 ohm and output impedance of 120 ohm at frequencies up to 100 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BLM18KG601BH1D by Murata Manufacturing

BLM18KG601BH1D

Murata Manufacturing

Murata Manufacturing's BLM18KG601BH1D is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L1.6xB0.8xH0.8 (mm), it offers an output impedance of 600 OHM and operates b/w -55 to 150 °C. Ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
DLW43SH510XK2L by Murata Manufacturing

DLW43SH510XK2L

Murata Manufacturing

Murata Manufacturing DLW43SH510XK2L is a FERRITE CHIP data line filter with 51uH inductance, 10 Mohm insulation resistance, and AEC-Q200 screening. It has 4 terminals, rated for 50V voltage and 0.23A current. Ideal for automotive applications due to its compact size (L4.5xB3.2xH2.6 mm) and surface mounting type.
DLW5BTM501SQ2L by Murata Manufacturing

DLW5BTM501SQ2L

Murata Manufacturing

DLW5BTM501SQ2L by Murata Mfg. is a Data Line Filter with 10 Mohm Min. Insulation Resistance, 50 V Rated Voltage, and 4 A Rated Current. It has 2 functions and operates b/w -40 to 85 °C, suitable for surface mount applications requiring impedance of 500 OHM in a compact size of L5.0XB5.0XH2.35 mm.
NFM3DCC471R1H3L by Murata Manufacturing

NFM3DCC471R1H3L

Murata Manufacturing

Murata Manufacturing's NFM3DCC471R1H3L is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 470uF capacitance. It is a feed-through capacitor suitable for surface mount applications in various electronic devices operating b/w -55 to 125 °C.
BLM15AX601SN1D by Murata Manufacturing

BLM15AX601SN1D

Murata Manufacturing

Murata Manufacturing's BLM15AX601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 0.34 ohm and output impedance of 600 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter is designed to handle up to 0.5A current in various electronic devices.
744272251 by Wuerth Elektronik & Kg

744272251

Wuerth Elektronik & Kg

Wurth Elektronik 744272251 is a UL-approved data line filter with 2 functions, rated at 80V and 2A. With inductance of 250uH, it operates b/w -40°C to 125°C. Ideal for applications requiring surface mount filters with dimensions of L10.0xB8.7xH6.5mm.
FCFBMJ3216HS800-T by Taiyo Yuden

FCFBMJ3216HS800-T

Taiyo Yuden

Taiyo Yuden's FCFBMJ3216HS800-T is a Ferrite Chip Data Line Filter with 2 terminals, 80 Ohm output impedance, and 4A rated current. Ideal for surface mount applications, it operates b/w -40°C to 85°C, offering low DC resistance of 0.01 ohm.
MPZ1608R391ATA00 by TDK

MPZ1608R391ATA00

TDK

TDK's MPZ1608R391ATA00 is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, it has an output impedance of 390 ohms and can handle a rated current of 1.2A.
782633601 by Wuerth Elektronik & Kg

782633601

Wuerth Elektronik & Kg

Wurth Elektronik 782633601 is a surface mount data line filter with AEC-Q200 screening. Features include FERRITE BEAD filter type, 1A rated current, and 600Ω output impedance. Ideal for automotive applications requiring noise suppression in compact spaces.