Image shown is a representation only.
| Manufacturer | Nidec Copal Electronics |
|---|---|
| Manufacturer's Part Number | CL-SB-12B-02T |
| Description | SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Type (Actuator): SLIDE; Solderability: REFLOW; Center Contact Material: COPPER ALLOY; |
| Datasheet | CL-SB-12B-02T Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .2 A |
| No. of Positions: | 2 |
| Center Contact Plating: | GOLD |
| Center Contact Material: | COPPER ALLOY |
| Housing Material: | STAINLESS STEEL |
| Type (Actuator): | SLIDE |
| Solderability: | REFLOW |
| Terminal Finish: | Gold (Au) |
| Switch Action: | LATCHED |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 10000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Material (Actuator): | POLYAMIDE |
| Contact Resistance: | 70 mohm |
| Insulation Resistance: | 100000000 ohm |
| End Contact Material: | COPPER ALLOY |
| Other Names: |
563-1319-2 563-1319-1 563-1319-6 CLSB12B02T |
| Maximum DC Contact Voltage: | 12 V |
| DC Maximum Rating R Load (Contact): | .2A@12VDC |
| Dielectric Withstand Volts (V): | 500VAC |
| Maximum Operating Force: | 2.5 N |
| Packing Method: | TR |
| Switch Type: | SLIDE SWITCH |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -40 Cel |
| Mounting Feature: | SURFACE MOUNT-STRAIGHT |
| Body Width: | 3.5 inch |
| Switch Function: | SPDT |
| Contact Timing: | BREAK-BEFORE-MAKE |
| Length (Actuator): | .079 inch |
| End Contact Plating: | GOLD |
| Insulator Material: | POLYPHENYLENE SULPHIDE |
| Body Height: | 3.5 mm |
| Body Length/Diameter: | 8.5 mm |








