Image shown is a representation only.
| Manufacturer | Nkk Switches |
|---|---|
| Manufacturer's Part Number | D22019P |
| Description | TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): TOGGLE BAT; Contact Function: ON-OFF-(ON); Terminal Length: .142 inch; |
| Datasheet | D22019P Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Center Contact Plating: | GOLD |
| Center Contact Material: | PHOSPHOR BRONZE |
| Type (Bushing): | M6P0.75 |
| Length (Bushing): | .283 inch |
| Housing Material: | POLYBUTYLENE TEREPHTHALATE |
| Type (Actuator): | TOGGLE BAT |
| Terminal Finish: | GOLD |
| Finish (Actuator): | CHROME |
| Switch Action: | MOMENTARY |
| Terminal Material: | BRASS |
| Termination Type: | SOLDER |
| Electrical Life: | 50000 Cycle(s) |
| Maximum Operating Temperature: | 70 Cel |
| Material (Actuator): | BRASS |
| Contact Resistance: | 50 mohm |
| Insulation Resistance: | 1000000000 ohm |
| End Contact Material: | BRASS |
| Angle (Actuator): | 24 deg |
| Dielectric Withstand Volts (V): | 1500VAC |
| Contact Function: | ON-OFF-(ON) |
| PCB Hole Count: | 3 |
| Switch Type: | TOGGLE SWITCH |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -10 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Body Width: | 7.0104 inch |
| Switch Function: | SPDT |
| Contact Timing: | BREAK-BEFORE-MAKE |
| Terminal Length: | .142 inch |
| End Contact Plating: | GOLD |
| Insulator Material: | GLASS FILLED POLYAMIDE |
| Body Height: | 13.8938 mm |
| Body Length/Diameter: | 14.4018 mm |
| AC Maximum Power Rating R Load (Contact): | 0.4VA@48VAC |
