Image shown is a representation only.
| Manufacturer | Nkk Switches |
|---|---|
| Manufacturer's Part Number | G12AP |
| Description | TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): COLUMN TOGGLE; Contact Function: ON-ON; Solderability: WAVE; |
| Datasheet | G12AP Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .014 A |
| Center Contact Plating: | GOLD OVER NICKEL |
| Center Contact Material: | PHOSPHOR BRONZE |
| Length (Bushing): | .063 inch |
| Housing Material: | GLASS FILLED POLYAMIDE |
| Type (Actuator): | COLUMN TOGGLE |
| Maximum AC Contact Voltage: | 28 V |
| Solderability: | WAVE |
| Terminal Finish: | GOLD |
| Switch Action: | LATCHED |
| Terminal Material: | PHOSPHOR BRONZE |
| Termination Type: | SOLDER |
| Electrical Life: | 100000 Cycle(s) |
| Maximum Operating Temperature: | 70 Cel |
| Material (Actuator): | GLASS FILLED POLYAMIDE |
| Contact Resistance: | 80 mohm |
| Insulation Resistance: | 500000000 ohm |
| Maximum AC Contact Current: | .014 A |
| End Contact Material: | PHOSPHOR BRONZE |
| Angle (Actuator): | 28 deg |
| Maximum DC Contact Voltage: | 28 V |
| DC Maximum Rating R Load (Contact): | .014A@28VDC |
| Dielectric Withstand Volts (V): | 500VAC |
| Contact Function: | ON-ON |
| PCB Hole Count: | 6 |
| Maximum Operating Force: | 1.19 N |
| DC Maximum Power Rating R Load (Contact): | 0.4VA@28VDC |
| Switch Type: | TOGGLE SWITCH |
| AC Maximum Rating R Load (Contact): | .014A@28VAC |
| Sealing: | EPOXY TERMINAL SEALED; WATER PROOF |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -25 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Body Width: | 4.5 inch |
| Switch Function: | SPDT |
| Terminal Length: | .102 inch |
| Length (Actuator): | .15 inch |
| End Contact Plating: | GOLD OVER NICKEL |
| Insulator Material: | GLASS FILLED POLYAMIDE |
| Body Height: | 5.4 mm |
| Body Length/Diameter: | 7 mm |
| Diameter (Bushing): | .157 inch |
