Image shown is a representation only.
| Manufacturer | Nkk Switches |
|---|---|
| Manufacturer's Part Number | JB-15FBP2 |
| Description | KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT TYPE; Contact Function: OFF-(ON); Solderability: HAND/WAVE; |
| Datasheet | JB-15FBP2 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .05 A |
| Center Contact Material: | STAINLESS STEEL |
| Housing Material: | GLASS FILLED POLYAMIDE |
| Type (Actuator): | FLAT TYPE |
| Solderability: | HAND/WAVE |
| Actuator Travel (mm): | 0.25 |
| Switch Action: | MOMENTARY-TACTILE |
| Terminal Material: | BRASS |
| Termination Type: | SOLDER |
| Electrical Life: | 5000000 Cycle(s) |
| Maximum Operating Temperature: | 70 Cel |
| Material (Actuator): | POLYACETAL |
| Contact Resistance: | 50 mohm |
| Insulation Resistance: | 500000000 ohm |
| End Contact Material: | BRASS |
| Maximum DC Contact Voltage: | 24 V |
| DC Maximum Rating R Load (Contact): | 0.05A@24VDC |
| Dielectric Withstand Volts (V): | 250VAC |
| Contact Function: | OFF-(ON) |
| PCB Hole Count: | 4 |
| Maximum Operating Force: | 1.8 N |
| Switch Type: | KEYPAD SWITCH |
| Minimum Operating Temperature: | -25 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Body Width: | 10 inch |
| Switch Function: | SPST |
| Circuit Config: | 1X1 |
| Terminal Length: | .122 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | GLASS FILLED POLYAMIDE |
| Body Height: | 4.2 mm |
| Additional Features: | LOW PROFILE |
| Body Length/Diameter: | 10 mm |
| No. of Switches: | 1 |
