Image shown is a representation only.
| Manufacturer | Nkk Switches |
|---|---|
| Manufacturer's Part Number | MS12ASG30 |
| Description | SLIDE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SLIDE; Contact Function: ON-ON; Solderability: WAVE; |
| Datasheet | MS12ASG30 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| No. of Positions: | 2 |
| Center Contact Plating: | GOLD OVER NICKEL |
| Center Contact Material: | COPPER ALLOY |
| Housing Material: | STAINLESS STEEL |
| Type (Actuator): | SLIDE |
| Solderability: | WAVE |
| Switch Action: | HORIZONTAL |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 50000 Cycle(s) |
| Maximum Operating Temperature: | 70 Cel |
| Contact Resistance: | 20 mohm |
| Insulation Resistance: | 1000000000 ohm |
| End Contact Material: | COPPER ALLOY |
| Angle (Actuator): | 0 deg |
| Other Names: |
MS12ASG30-RO MS12ASG30-RO-ND 360-2390 |
| Dielectric Withstand Volts (V): | 1500VAC |
| Contact Function: | ON-ON |
| PCB Hole Count: | 5 |
| DC Maximum Power Rating R Load (Contact): | 0.4VA@28VDC |
| Switch Type: | SLIDE SWITCH |
| Sealing: | EPOXY |
| Minimum Operating Temperature: | -10 Cel |
| Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
| Body Width: | 6.604 inch |
| Switch Function: | SPDT |
| Contact Timing: | BREAK-BEFORE-MAKE |
| Terminal Length: | .126 inch |
| Length (Actuator): | .224 inch |
| End Contact Plating: | GOLD OVER NICKEL |
| Insulator Material: | GLASS FILLED DIALLYL PHTHALATE |
| Body Height: | 15.8496 mm |
| Body Length/Diameter: | 12.7 mm |









