WR11AT by Nkk Switches | Switches

Image shown is a representation only.

Manufacturer	Nkk Switches
Manufacturer's Part Number	WR11AT
Description	ROCKER SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): ROCKER; Contact Function: ON-OFF; Solderability: HAND;
Datasheet	WR11AT Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	15 A
Center Contact Plating:	SILVER
Housing Material:	POLYAMIDE
Type (Actuator):	ROCKER
Maximum AC Contact Voltage:	250 V
Solderability:	HAND
Terminal Material:	BRASS
Termination Type:	SCREW
Electrical Life:	15000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Manufacturer Series:	WR
Material (Actuator):	POLYPHENYLENE OXIDE
Contact Resistance:	10 mohm
Insulation Resistance:	200000000 ohm
Color (Actuator):	BLACK
Maximum AC Contact Current:	15 A
Angle (Actuator):	24 deg
Maximum DC Contact Voltage:	30 V
DC Maximum Rating R Load (Contact):	15A@30VDC
Contact Function:	ON-OFF
Switch Type:	ROCKER SWITCH
AC Maximum Rating R Load (Contact):	15A@250VAC
Sealing:	EPOXY
Minimum Operating Temperature:	-20 Cel
Mounting Feature:	PANEL MOUNT
Body Width:	24.003 inch
Switch Function:	SPST
Terminal Length:	.327 inch
Length (Actuator):	.209 inch
End Contact Plating:	SILVER
Body Height:	30.5816 mm
Body Length/Diameter:	40.9956 mm

Popular Products

DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;