NXP Semiconductors - IP4060CX16/LF

Murata Manufacturing's NFM21CC222R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 2200uF capacitance. It is a feed through capacitor used in applications requiring surface mount filters for noise suppression.

ACM2520-801-3P-T002 by TDK is a FERRITE CHIP data line filter with 3 functions. It has a rated voltage of 20V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications and has dimensions of L2.5XB2.0XH1.2 (mm).

1806J0500204MXTE07 by Knowles Precision Devices is a feed through capacitor with 50V rated voltage, 200000uF capacitance, and 2A rated current. It is used in data line filters for applications requiring high insulation resistance and operating temperatures ranging from -55 to 85°C.

Murata's BLM18AG601SN1B is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.38 ohm and operates b/w -55°C to 125°C. This ferrite chip filter has an output impedance of 600 ohm and is rated for a current of 0.5A, making it suitable for noise suppression in circuits up to 100MHz frequency range.

Wurth Elektronik 742792663 is a 0603 multi-layer FERRITE CHIP filter with dimensions L1.6XB0.8XH0.8 (mm). It operates b/w -55 to 125 °C, has a max frequency of 150 MHz, and DC resistance of 0.85 ohm. Ideal for data line filtering applications due to its surface mount design and output impedance of 1000 OHM.

BLM18SG331TN1D by Murata is a chip bead data line filter with 2 terminals, rated for 1A current. It operates b/w -55°C to 125°C, offering an output impedance of 330 ohm at frequencies ranging from 100 MHz. This ferrite chip filter in a 0603 case is ideal for surface mount applications in various electronic devices.

MPZ2012S221AT000 by TDK is a chip bead data line filter with dimensions of 2x1.25x0.85mm, suitable for surface mount applications. It has a max operating temperature of 125°C and offers an output impedance of 220 ohms at a min frequency of 100 MHz. Ideal for noise suppression in electronic circuits requiring high-frequency filtering.

FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2 A; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel; Dimensions: L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch);

Murata Manufacturing's BLM21AH102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 85°C, offering a DC resistance of 0.45 ohm and output impedance of 1000 ohm at 100 MHz. Ideal for data line filtering applications due to its compact size and high impedance characteristics.

Murata Manufacturing's BLM18EG471SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of 1.6x0.8x0.8 mm, it offers a max frequency of 1000 MHz and DC resistance of 0.21 ohm. Ideal for surface mount applications in electronics requiring impedance control up to 550 OHM at frequencies ranging from 100 MHz to 1000 MHz.

Laird Technologies' HZ0603B102R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.6 ohm and output impedance of 1000 ohm for frequencies ranging from 25MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.

DATA LINE FILTER; Maximum DC Resistance: .07 ohm; Rated Current: .5 A; Width (mm): 16.0; Rated Voltage: 50 V; Dimensions: L21.0XB16.0XH14.0 (mm)/L0.827XB0.63XH0.551 (inch);

Data Line Filters;

Wurth Elektronik 74270057 is a FERRITE BEAD Data Line Filter with 808 OHM Output Impedance. Operating temperature ranges from -25 to 125 °C, with a diameter of 19mm and dimensions D19.0XH50.8 (mm). Ideal for applications requiring noise suppression in data lines or signal filtering in electronic circuits.

Murata Manufacturing's BLM18PG181SN1D is a chip bead data line filter with 2 terminals, rated for 1.5A current and 180 ohm output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.

1206J0500104MXTE03 by Knowles Precision Devices is a data line filter with 2 functions and a rated voltage of 50V. Featuring a min insulation resistance of 10000 Mohm, it is ideal for applications requiring feed through capacitor filters in temperatures ranging from -55 to 125 °C.

Murata Manufacturing's BLM15AG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.0XB0.5XH0.5 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.65 ohm, suitable for surface mount applications in electronics for impedance matching and noise suppression.

Taiyo Yuden's FBMH1608HM101-T is a chip bead data line filter with 2 terminals, ideal for applications requiring noise suppression. With a max operating temperature of 85°C and DC resistance of 0.035 ohm, it offers effective filtering up to 100 MHz. This surface mount filter measures L1.6xB0.8xH0.8 mm and is suitable for high-speed data transmission systems.

TDK's MMZ1608A252BTD25 is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP construction, it has 2 terminals and operates b/w -55 to 125 °C. With dimensions of L1.6xB0.8xH0.8 (mm), it offers an output impedance of 2500 OHM and rated current of 0.2 A, making it ideal for automotive applications.

Murata Manufacturing's BLM18SG121TN1 is a FERRITE CHIP data line filter with 120 OHM output impedance, 3A rated current, and -55 to 125 °C operating temperature range. Ideal for surface mount applications requiring effective noise suppression in electronic circuits.