ISP1106W,115 by NXP Semiconductors | Interface ICs

Image shown is a representation only.

Manufacturer	NXP Semiconductors
Manufacturer's Part Number	ISP1106W,115
Description	LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BUTT; No. of Terminals: 16; Package Code: HBCC; Package Shape: SQUARE;
Datasheet	ISP1106W,115 Datasheet
In Stock	184

NAME	DESCRIPTION
Minimum Supply Voltage:	1.65 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	3 V
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	.8 mm
Surface Mount:	YES
No. of Terminals:	16
Terminal Position:	BOTTOM
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG
JESD-30 Code:	S-PBCC-B16
Package Shape:	SQUARE
Terminal Form:	BUTT
Maximum Operating Temperature:	85 Cel
Package Code:	HBCC
Interface Standard:	GENERAL PURPOSE
Interface IC Type:	LINE TRANSCEIVER
Width:	3 mm
Nominal Supply Voltage-1:	3.3 V
Maximum Supply Voltage-1:	3.6 V
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	3.6 V
Differential Output:	YES
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	18 ns
Receiver No. of Bits:	3
Length:	3 mm
Maximum Receive Delay:	15 ns
Additional Features:	TWO SINGLE ENDED RECEIVERS
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Pricing (USD)

Qty.	Unit Price	Ext. Price
184	-	-

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;

PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.

Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;