KTY82/121 by NXP Semiconductors | Sensors & Transducers

Image shown is a representation only.

Manufacturer	NXP Semiconductors
Manufacturer's Part Number	KTY82/121
Description	TEMPERATURE SENSOR,ANALOG,RESISTANCE BASED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Additional Features: SEATED HEIGTH-MAX;
Datasheet	KTY82/121 Datasheet
In Stock	373

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Operating Current:	10 mA
Sub-Category:	Other Sensors/Transducers
Housing:	PLASTIC
Terminal Finish:	Tin (Sn)
JESD-609 Code:	e3
Minimum Operating Temperature:	-55 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	1.3 inch
Sensors or Transducers Type:	TEMPERATURE SENSOR,ANALOG,RESISTANCE BASED
No. of Terminals:	3
Temperature Coef (ppm/Cel):	POSITIVE
Package Equivalence Code:	TO-236
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Body Height:	1 mm
Additional Features:	SEATED HEIGTH-MAX
Body Length/Diameter:	2.9 mm
Maximum Operating Temperature:	150 Cel
Nominal R0:	807 ohm

Pricing (USD)

Qty.	Unit Price	Ext. Price
373	-	-

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.