MC9S08QE96CFT by NXP Semiconductors | Peripheral ICs

Image shown is a representation only.

Manufacturer	NXP Semiconductors
Manufacturer's Part Number	MC9S08QE96CFT
Description	MICROCONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
In Stock	215

NAME	DESCRIPTION
Minimum Supply Voltage:	1.8 V
Package Body Material:	UNSPECIFIED
Nominal Supply Voltage:	3 V
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	1 mm
Sub-Category:	Microcontrollers
Surface Mount:	YES
ADC Channels:	YES
No. of Terminals:	48
DMA Channels:	NO
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
No. of I/O Lines:	40
Address Bus Width:	0
Technology:	CMOS
JESD-30 Code:	S-XQCC-N48
Maximum Clock Frequency:	16 MHz
Package Shape:	SQUARE
ROM Words:	98304
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Width:	7 mm
Moisture Sensitivity Level (MSL):	3
Speed:	50.33 rpm
Peripheral IC Type:	MICROCONTROLLER
Maximum Supply Voltage:	3.6 V
RAM Bytes:	6144
External Data Bus Width:	0
Bit Size:	8
DAC Channels:	NO
Minimum Operating Temperature:	-40 Cel
Qualification:	Not Qualified
Package Equivalence Code:	LCC48,.27SQ,20
Length:	7 mm
PWM Channels:	YES
Peak Reflow Temperature (C):	260
ROM Programmability:	FLASH
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	1.8/3.6

Pricing (USD)

Qty.	Unit Price	Ext. Price
215	-	-

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;

2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).

Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;