MPXAZ4100AC6T1 by NXP Semiconductors | Sensors & Transducers

Image shown is a representation only.

Manufacturer	NXP Semiconductors
Manufacturer's Part Number	MPXAZ4100AC6T1
Description	PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Range: 4.87-5.032V; Termination Type: SOLDER;
Datasheet	MPXAZ4100AC6T1 Datasheet
In Stock	887

NAME	DESCRIPTION
Minimum Supply Voltage:	4.85 V
Maximum Operating Current:	10 mA
Maximum Supply Voltage:	5.35 V
Maximum Accuracy (%):	1.8
Nominal Offset:	306MV
Minimum Pressure Range:	2.9 Psi
Output Range:	4.87-5.032V
Output Type:	ANALOG VOLTAGE
Response Time:	1000 us
Housing:	PLASTIC
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Port Type:	BARBLESS
Body Width:	10.66 inch
Sensors or Transducers Type:	PRESSURE SENSOR,PIEZORESISTIVE
Pressure Sensing Mode:	ABSOLUTE
Package Shape or Style:	SQUARE
Termination Type:	SOLDER
Linearity (%):	1.8
Body Height:	12.95 mm
Additional Features:	SENSITIVITY 54 MILLI VOLT PER KILO PASCAL, TEMPERATURE COMPENSATED
Maximum Pressure Range:	15.2 Psi
Body Length/Diameter:	10.66 mm
Maximum Operating Temperature:	125 Cel

Pricing (USD)

Qty.	Unit Price	Ext. Price
887	-	-

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;