PCA9515ADP-T by NXP Semiconductors | Interface ICs

Image shown is a representation only.

Manufacturer	NXP Semiconductors
Manufacturer's Part Number	PCA9515ADP-T
Description	LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
Datasheet	PCA9515ADP-T Datasheet
In Stock	207

NAME	DESCRIPTION
Minimum Supply Voltage:	2.3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	2.5 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.1 mm
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Technology:	CMOS
JESD-30 Code:	S-PDSO-G8
Package Shape:	SQUARE
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	TSSOP
Interface Standard:	GENERAL PURPOSE
Interface IC Type:	LINE TRANSCEIVER
Width:	3 mm
Moisture Sensitivity Level (MSL):	1
Input Characteristics:	STANDARD
Driver No. of Bits:	2
Maximum Supply Voltage:	2.7 V
Differential Output:	NO
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	2
Qualification:	Not Qualified
Maximum Transmit Delay:	130 ns
Package Equivalence Code:	TSSOP8,.19
Receiver No. of Bits:	2
Length:	3 mm
Maximum Receive Delay:	130 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	2.5/3.3

Pricing (USD)

Qty.	Unit Price	Ext. Price
207	-	-

Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;