NXP Semiconductors - PEMI1QFN/CE,315

Wurth Elektronik 742792035 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C and has a DC resistance of 0.3 ohm. With dimensions of L2.0XB1.2XH0.9 (mm), it is designed for surface mount installation in electronic devices up to 220 MHz frequency range.

HR2220V801R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers an output impedance of 800 OHM, rated current of 8 A, and DC resistance of 0.01 ohm. Ideal for surface mount applications in filtering frequencies from 25 MHz to 1000 MHz.

TDK MMZ1608R102ATA00 is a 0603 chip bead filter with 2 terminals. It offers max operating temp of 125°C and min of -55°C, with width of 0.8mm and length of 1.6mm. Ideal for data line filtering applications due to its ferrite construction, output impedance of 1000Ω, and rated current of 0.4A.

Murata's BLM18AG601SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.

Wurth Elektronik 74279274 is a multi-layer FERRITE CHIP filter with dimensions of L1.0XB0.5XH0.5 (mm). It operates b/w -55 to 125 °C, has a DC resistance of 0.25 ohm, and an output impedance of 30 OHM. Ideal for data line filtering applications up to 500 MHz frequency range.

FEED THROUGH CAPACITOR; Mounting Type: PCB MOUNT; Capacitance: 1000 uF; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel; Minimum Insulation Resistance: 10000 Mohm;

Wurth Elektronik 742792040 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a DC resistance of 0.15 ohm. Ideal for applications requiring noise suppression in circuits operating at frequencies ranging from 100 MHz to 150 MHz.

Murata Manufacturing's DLP11SN900HL2L is a Data Line Filter with 2 functions, rated at 5V. It has a min insulation resistance of 100 Mohm and operates b/w -40 to 85 °C. Ideal for applications requiring data line filtering with dimensions of L1.25xB1.0xH0.82 mm and output impedance of 90 ohm at 0.15A current rating.

Wurth Elektronik 744822301 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 1000uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.035 ohm, and rated current of 3A. Ideal for applications requiring noise suppression in data lines.

Wurth Elektronik 742792695 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a max frequency of 110 MHz. Ideal for applications requiring noise suppression in electronic circuits.

Wurth Elektronik 744228 Data Line Filter has UL approval, rated voltage of 80V, and inductance of 25uH. With dimensions L9.2XB6.0XH5.0 (mm), it is ideal for noise filtering in data transmission applications with a max operating temperature of 125°C.

PA4339.102NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 8uH and operates b/w -40°C to 125°C. Ideal for applications requiring surface mount filters with a max current rating of 3A.

MMZ2012Y102BT000 by TDK is a chip bead data line filter with 2 terminals, rated current of 0.5A, and max DC resistance of 0.3 ohm. It is used for filtering in electronic circuits due to its ferrite construction and output impedance of 1000 ohm. Operating temperatures range from -55 to 125 °C.

Laird Technologies' HZ0603B102R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.6 ohm and output impedance of 1000 ohm for frequencies ranging from 25MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.

STMicroelectronics ECMF02-4CMX8 is a DATA LINE FILTER with 2 functions and 8 terminals. It has a max operating temp of 125°C, DC resistance of 4 ohm, and output impedance of 50 OHM. Ideal for applications requiring data line filtering in compact spaces due to its small dimensions (2.55mm x 1.25mm x 0.6mm).

The Panasonic EXC24CE900U is a data line filter with 2 functions and a rated voltage of 5V. It has a max operating temperature of 85°C and is suitable for surface mount applications.

Murata's BLM18AG601SN1B is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.38 ohm and operates b/w -55°C to 125°C. This ferrite chip filter has an output impedance of 600 ohm and is rated for a current of 0.5A, making it suitable for noise suppression in circuits up to 100MHz frequency range.

Murata Manufacturing's NFM41PC204F1H3 is a data line filter with 2A rated current, 0.2uF capacitance, and 50V rated voltage. It features feed through capacitor type for applications requiring noise suppression in electronic circuits. Operating temperature range from -55°C to 85°C makes it suitable for various environments.

TDK's ACM2012-900-2P-T001 is a Data Line Filter with 2 functions, AEC-Q200 screening. It has a rated voltage of 50V, max operating temp of 105°C, and DC resistance of 0.19 ohm. Ideal for applications requiring noise suppression in automotive electronics.

FBMJ3216HS800-TV by Taiyo Yuden is a ferrite chip data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -40°C. This surface mount filter has dimensions of L3.2XB1.6XH1.1 (mm) and is suitable for applications requiring an output impedance of 80 ohms and a rated current of 4A.