D2JW-01K21 by Omron | Switches

Image shown is a representation only.

Manufacturer	Omron
Manufacturer's Part Number	D2JW-01K21
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Switch Action: MOMENTARY; Body Length/Diameter: 12.7 mm;
Datasheet	D2JW-01K21 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.1 A
Maximum DC Contact Voltage:	30 V
DC Maximum Rating R Load (Contact):	.1A@30VDC
Maximum Operating Force:	.98 N
Type (Actuator):	HINGE ROLLER LEVER
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum Pre Travel:	5.2 mm
Sealing:	IP50
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	PANEL MOUNT
Actuator Travel (mm):	6.3
Body Width:	5.3 inch
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	SOLDER
Electrical Life:	100000 Cycle(s)
Body Height:	9.4 mm
Body Length/Diameter:	12.7 mm
Maximum Operating Temperature:	85 Cel
Manufacturer Series:	D2JW

Popular Products

FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.