D2MV-01-1C3 by Omron | Switches

Image shown is a representation only.

Manufacturer	Omron
Manufacturer's Part Number	D2MV-01-1C3
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Electrical Life: 1000000 Cycle(s); Maximum Pre Travel: 1.2 mm;
Datasheet	D2MV-01-1C3 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.1 A
Maximum DC Contact Voltage:	30 V
DC Maximum Rating R Load (Contact):	.1A@30VDC
Maximum Operating Force:	.49 N
Type (Actuator):	PIN PLUNGER
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage:	125 V
Maximum Pre Travel:	1.2 mm
AC Maximum Rating R Load (Contact):	.1A@125VAC
Sealing:	IP40
Minimum Operating Temperature:	-25 Cel
Mounting Feature:	PANEL MOUNT
Actuator Travel (mm):	2.5
Body Width:	10.3 inch
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	SOLDER
Electrical Life:	1000000 Cycle(s)
Body Height:	15.9 mm
Body Length/Diameter:	31.8 mm
Maximum Operating Temperature:	80 Cel
Manufacturer Series:	D2MV
Maximum AC Contact Current:	.1 A

Popular Products

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;