D2T-LT1S by Omron | Switches

Image shown is a representation only.

Manufacturer	Omron
Manufacturer's Part Number	D2T-LT1S
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): HINGE LEVER; Maximum AC Contact Voltage: 250 V; Maximum Operating Force: 1.47 N;
Datasheet	D2T-LT1S Datasheet

NAME	DESCRIPTION
Other Names:	Z4469 D2T-LT1S-ND -D2T-LT1S D2TLT1S
Maximum DC Contact Current:	6 A
Maximum DC Contact Voltage:	30 V
DC Maximum Rating R Load (Contact):	6A@30VDC
Maximum Operating Force:	1.47 N
Type (Actuator):	HINGE LEVER
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage:	250 V
AC Maximum Rating R Load (Contact):	5A@250VAC
Sealing:	IP40
Minimum Operating Temperature:	-25 Cel
Mounting Feature:	PANEL MOUNT
Actuator Travel (mm):	1.6
Body Width:	12.5 inch
Switch Action:	MOMENTARY
Switch Function:	DPST
Termination Type:	SOLDER
Electrical Life:	100000 Cycle(s)
Body Height:	24.65 mm
Body Length/Diameter:	34.4 mm
Maximum Operating Temperature:	80 Cel
Maximum AC Contact Current:	5 A

Popular Products

RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;

The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;