D4C-2502 by Omron | Switches

Image shown is a representation only.

Manufacturer	Omron
Manufacturer's Part Number	D4C-2502
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER PLUNGER; Maximum Operating Temperature: 70 Cel; Termination Type: WIRE;
Datasheet	D4C-2502 Datasheet

NAME	DESCRIPTION
Maximum Operating Force:	11.77 N
Type (Actuator):	ROLLER PLUNGER
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage:	125 V
Maximum Pre Travel:	1.8 mm
AC Maximum Rating R Load (Contact):	.1A@125VAC
Sealing:	IP67
Minimum Operating Temperature:	-10 Cel
Mounting Feature:	PANEL MOUNT
Actuator Travel (mm):	4.8
Body Width:	16 inch
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	WIRE
Electrical Life:	200000 Cycle(s)
Body Height:	51.5 mm
Body Length/Diameter:	40 mm
Maximum Operating Temperature:	70 Cel
Manufacturer Series:	D4C
Maximum AC Contact Current:	.1 A

Popular Products

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;

BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;