Omron - E3T-SR42-C2M

E3T-SR42-C2M by Omron

Image shown is a representation only.

Manufacturer	Omron
Manufacturer's Part Number	E3T-SR42-C2M
Description	LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Output Type: NPN; Package Shape or Style: CYLINDRICAL; Maximum Operating Current: 20 mA; Maximum Supply Voltage: 24 V; Body Height: 20.6 mm;
Datasheet	E3T-SR42-C2M Datasheet

E3T-SR42-C2M Technical Details

NAME	DESCRIPTION
Minimum Supply Voltage:	12 V
Other Names:	E3T-SR42-C2M E3TSR42C2M E3T-SR42-C 2M-ND
Maximum Operating Current:	20 mA
Maximum Measurement Range (mm):	200 mm
Maximum Supply Voltage:	24 V
Output Type:	NPN
Response Time:	1000 us
Housing:	PBT
Minimum Operating Temperature:	-25 Cel
Body Width:	7 inch
Sensors or Transducers Type:	LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE
Package Shape or Style:	CYLINDRICAL
Termination Type:	CABLE
Body Height:	20.6 mm
Additional Features:	IP67, MUTUAL INTERFERENCE PREVENTION, REVERSE POLARITY PROTECTION, SHORT CIRCUIT PROTECTION, SURGE SUPPRESSOR
Body Length/Diameter:	11 mm
Maximum Operating Temperature:	55 Cel
Minimum Measurement Range (mm):	30 mm

Popular Products

RK73H2ATTD10R0F

Koa Speer Electronics

RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.

1N4148

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

1N4148WS

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;

2N2222A

Onsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

ULN2803A

Onsemi

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

ESD5Z5.0T1G

Onsemi

ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.

2N7002

Bytesonic Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

DS18B20Z+T&R

Analog Devices

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

Category Top Products