SS-5GL2-F by Omron | Switches

Image shown is a representation only.

Manufacturer	Omron
Manufacturer's Part Number	SS-5GL2-F
Description	SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Termination Type: SOLDER; DC Maximum Rating R Load (Contact): 5A@14VDC;
Datasheet	SS-5GL2-F Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	5 A
Maximum DC Contact Voltage:	14 V
DC Maximum Rating R Load (Contact):	5A@14VDC
Maximum Operating Force:	.49 N
Type (Actuator):	HINGE ROLLER LEVER
Switch Type:	SNAP ACTING/LIMIT SWITCH
Maximum AC Contact Voltage:	125 V
Maximum Pre Travel:	1.2 mm
AC Maximum Rating R Load (Contact):	5A@125VAC
Sealing:	IP40
Minimum Operating Temperature:	-25 Cel
Mounting Feature:	PANEL MOUNT
Actuator Travel (mm):	2
Body Width:	6.4 inch
Switch Action:	MOMENTARY
Switch Function:	SPDT
Termination Type:	SOLDER
Electrical Life:	200000 Cycle(s)
Body Height:	10.2 mm
Body Length/Diameter:	19.8 mm
Maximum Operating Temperature:	85 Cel
Maximum AC Contact Current:	5 A

Popular Products

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;