Image shown is a representation only.
| Manufacturer | On Shore Technology |
|---|---|
| Manufacturer's Part Number | USB-A1HSW6 |
| Description | USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Reference Standard: UL; Contact Resistance: 30 mohm; |
| Datasheet | USB-A1HSW6 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| PCB Contact Pattern: | RECTANGULAR |
| Mating Contact Finish: | AU ON NI |
| Sub-Category: | Telecom and Datacom Connectors |
| Shell Finish: | NICKEL |
| Termination Type: | SOLDER |
| Maximum Operating Temperature (Cel): | 85 |
| Body Length: | .571 inch |
| Contact Gender: | FEMALE |
| Connector Type: | USB CONNECTOR |
| Contact Material: | PHOSPHOR BRONZE |
| Mounting Option-1: | LOCKING |
| Contact Resistance: | 30 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Mounting Style: | RIGHT ANGLE |
| Polarization Key: | POLARIZED HOUSING |
| No. of Ports: | 1 |
| Plating Thickness (inch): | FLASH |
| Contact Style: | USB, SER A FLAT |
| No. of PCB Rows: | 1 |
| Mounting Type: | BOARD |
| Body Depth: | .555 inch |
| Minimum Operating Temperature: | 0 Cel |
| Total No. of Contacts: | 4 |
| Body Width: | .272 inch |
| Terminal Pitch (mm): | 2.0066 |
| Terminal Length: | .11 inch |
| Termination Contact Finish: | GOLD FLASH OVER NICKEL |
| Rated Current - Signal: | 1 A |
| No. of Connectors: | ONE |
| Insulator Material: | GLASS FILLED POLYESTER |
| Reference Standard: | UL |
| Shell Material: | BRASS |
| Reliability: | COMMERCIAL |
| Board Mounting Option: | SOLDER HOLDING FLANGE |
