Onsemi - CM1407-08DF

EMI4192MTTAG by Onsemi is a Data Line Filter with 2 functions and 10 terminals. It has a max operating temperature of 85°C, DC resistance of 5 ohm, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a capacitance of 1.3 uF in plastic/epoxy packages.

The Bourns 7116 is a data line filter with two functions. It has a maximum operating temperature of 105°C and a minimum operating temperature of -55°C. The inductance is 8000 uH and the maximum DC resistance is 0.2 ohm. It is a through-hole mount and rated for a current of 2 A.

Murata Manufacturing's BNX025H01L is a 25V DATA LINE FILTER with 50 Ohm output impedance. AEC-Q200 compliant, it operates b/w -55°C to 125°C. Ideal for automotive applications due to its high insulation resistance and 15A rated current capacity.

DATA LINE FILTER; Rated Current: 10 A; Maximum Operating Temperature: 85 Cel; Inductance: .1 uH; Capacitance: 4000 uF; Length: 8 mm;

Murata Manufacturing's BLM15AX601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 0.34 ohm and output impedance of 600 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter is designed to handle up to 0.5A current in various electronic devices.

TDK's MPZ1608S101AT is a 0603 chip bead filter with 2 terminals. It offers a max operating temp of 125°C and min freq of 100 MHz. Ideal for data line filtering, it has a DC resistance of 0.03 ohm and output impedance of 100 ohm, suitable for surface mount applications.

BLM15AX221SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L1.0XB0.5XH0.5 (mm) and is commonly used in surface mount applications for impedance matching and noise suppression in data lines.

Murata Manufacturing's BLM18AG601SH1D is an AEC-Q200 compliant chip bead filter with 2 terminals, ideal for data line applications. With a max operating temperature of 125°C and DC resistance of 0.38 ohm, it offers effective filtering at frequencies ranging from 100 MHz. This surface mount ferrite chip measures L1.6xB0.8xH0.8 (mm) and is suitable for use in automotive electronics due to its high output impedance of 600 OHM.

DATA LINE FILTER; Maximum DC Resistance: .01 ohm; Rated Current: 10 A; Rated Voltage: 200 V; No. of Functions: 1; Additional Features: PI-TYPE CIRCUIT;

The TDK MPZ2012S102A is an 0805 chip bead data line filter with a max operating temperature of 125°C. With a min frequency of 100 MHz and DC resistance of 0.15 ohm, it offers output impedance of 1000 OHM. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.

Murata Manufacturing's BLM21BB750SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a DC resistance of 0.16 ohm and output impedance of 75 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.

Murata Manufacturing's BLM18BD601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of 1.6x0.8x0.8 mm, it offers a max frequency of 100 MHz and DC resistance of 0.65 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 600 OHM at a rated current of 0.2 A.

Wurth Elektronik 742792040 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a DC resistance of 0.15 ohm. Ideal for applications requiring noise suppression in circuits operating at frequencies ranging from 100 MHz to 150 MHz.

Vicor's MQPI-18LP-01 is a 28V data line filter with 10 terminals, rated for 7A current. With a temperature range of -55 to 125°C, it offers an output impedance of 50Ω. Ideal for surface mount applications, this compact filter measures L24.867xB12.421xH3.353mm and is suitable for various electronic devices requiring noise suppression in data lines.

Wurth Elektronik 742792117 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max frequency of 600 MHz, DC resistance of 0.005 ohm, and output impedance of 48 OHM. Ideal for data line filtering applications due to its rated current of 6 A and surface mounting type.

Wurth Elektronik 744229 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 6.5uH. It operates b/w -40 to 125°C, has a max DC resistance of 0.95 ohm, and output impedance of 18400 ohm. This surface mount filter is ideal for applications requiring noise suppression in data lines.

DLW43SH101XK2L by Murata Mfg. is a FERRITE CHIP filter with 100uH inductance, 10 Mohm insulation resistance, and 50V rated voltage. It has 2 functions and operates b/w -40 to 125 °C. Ideal for data line filtering applications due to AEC-Q200 screening level compliance.

DLW32MH101XT2L by Murata Manufacturing is a data line filter with 2 functions. It has a min insulation resistance of 10 Mohm and can operate at temperatures ranging from -40 to 125 °C. This filter is commonly used in automotive applications due to its AEC-Q200 screening level.

Wurth Elektronik 744228 Data Line Filter has UL approval, rated voltage of 80V, and inductance of 25uH. With dimensions L9.2XB6.0XH5.0 (mm), it is ideal for noise filtering in data transmission applications with a max operating temperature of 125°C.

Murata Manufacturing's BNX002-11 is a 50V rated data line filter with 100 Mohm insulation resistance. With dimensions of L12.0xB11.0xH12.5 (mm), it operates b/w -40 to 85 °C and has an output impedance of 50 OHM. Ideal for applications requiring noise suppression in data lines, this filter has a rated current of 10A and is mounted through hole.