Onsemi - CM1425-03CS

Wurth Elektronik 742792064 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.3A current. It operates b/w -55 to 125 °C and has a max DC resistance of 0.2 ohm. Ideal for applications requiring a compact surface mount filter with 75 OHM output impedance.

The Bourns 7122-RC Data Line Filter has 2 functions, 4 terminals, and inductance of 25500 uH. With UL approval, it operates b/w -55°C to 105°C. Ideal for applications requiring a max current of 4A such as data line filtering.

4300-025LF by Cts is a Data Line Filter with FEED THROUGH CAPACITOR type. It has a Rated Voltage of 50V, Max Insertion Loss of 60dB, and Min Insulation Resistance of 10000 Mohm. Ideal for applications requiring noise filtering in data lines with a rated current of 5A.

Murata Manufacturing's BLM18BB331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 330Ω and max DC resistance of 0.58Ω. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.4A and is commonly used in electronic devices for noise suppression at frequencies up to 100MHz.

Taiyo Yuden's FBMJ3216HM600-T is a chip bead data line filter with 2 terminals, rated for 4A current. Featuring ferrite chip construction, it offers 60 ohm output impedance and operates b/w -40 to 85°C. Ideal for surface mount applications in filtering frequencies up to 100 MHz.

Murata Manufacturing's BLM15BB221SN1D is a chip bead data line filter with 2 terminals, rated current of 0.2A, and output impedance of 220 ohm. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.0xB0.5xH0.5 mm.

LFBKP2125HS221-T by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 85°C and min of -55°C. With dimensions of L2.0XB1.25XH0.85 (mm), it is ideal for applications requiring an output impedance of 220 OHM, rated current of 2A, and surface mounting type.

Murata Manufacturing's BLM21PG600SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications, this surface mount component has a rated current of 3A and uses ferrite material for effective noise suppression.

DATA LINE FILTER MODULE; Maximum DC Resistance: .02 ohm; Rated Current: 5 A; Minimum Operating Temperature: -40 Cel; Rated Voltage: 75 V; Dimensions: L25.4XB25.4XH10.16 (mm)/L1.0XB1.0XH0.4 (inch);

FEED THROUGH CAPACITOR; Rated Current: 5 A; Height: 2.79 mm; Mounting Type: PANEL MOUNT; JESD-609 Code: e4; Maximum Insertion Loss: 25 dB;

BLM15HG601SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.

Wurth Elektronik 742792711 is a FERRITE CHIP Data Line Filter with max operating temp of 125°C and min of -55°C. It has a width of 0.5mm, length of 1mm, and output impedance of 100Ω. Ideal for surface mount applications in electronics to reduce noise interference on data lines.

Yageo CX1206MKX7R9BB104 is a FEED THROUGH CAPACITOR with 4 terminals, rated at 50V. It offers high insulation resistance of 10000 Mohm and capacitance of 100000 uF. Ideal for data line filtering applications, it operates b/w -55 to 125 °C, making it suitable for various electronic devices.

DLW5BTM501SQ2L by Murata Mfg. is a Data Line Filter with 10 Mohm Min. Insulation Resistance, 50 V Rated Voltage, and 4 A Rated Current. It has 2 functions and operates b/w -40 to 85 °C, suitable for surface mount applications requiring impedance of 500 OHM in a compact size of L5.0XB5.0XH2.35 mm.

The TDK MPZ2012S300AT is an 0805 chip bead filter with 2 terminals. With a max operating temp of 125°C and min of -55°C, it offers low DC resistance of 0.01 ohm and output impedance of 30Ω. Ideal for data line filtering applications due to its compact size (L2.0xB1.25xH0.85 mm) and high rated current of 6A.

TDK's ACT45B-101-2P-TL003 is a FERRITE CHIP filter with 100uH inductance, 1.5ohm DC resistance, and 50V rated voltage. Ideal for data line filtering applications due to its compact dimensions of L4.5xB3.2xH2.8mm and surface mounting type capability.

FBMH3225HM102NT by Taiyo Yuden is a chip bead data line filter with 2 terminals, rated for 2A current. Featuring ferrite chip construction, it operates b/w -40°C to 85°C and offers an output impedance of 1000Ω at frequencies ranging from 100MHz. Ideal for surface mount applications requiring effective noise suppression in electronic circuits.

Bourns MH2029-301Y is a chip bead data line filter with 2 terminals. It offers 0.2 Mohm min insulation resistance, 100 MHz min frequency, and 1 A rated current. Ideal for applications requiring surface mount filters in compact dimensions like L2.0XB1.2XH0.9 (mm).

Murata Manufacturing's BLM18KG700TN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With a max DC resistance of 0.022 ohm and output impedance of 70 ohm, it is ideal for applications requiring filtering at frequencies up to 100 MHz. This surface mount ferrite chip filter has dimensions of L1.6xB0.8xH0.6 mm and can handle a rated current of 3.5 A.

Murata Manufacturing's BLM18AG601SN1J is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it operates b/w -55 to 125 °C and has a max DC resistance of 0.38 ohm. With dimensions of L1.6xB0.8xH0.8 (mm), it is ideal for applications requiring a 600 OHM output impedance at frequencies ranging from 100 MHz, packed in tape for surface mount installation.