Onsemi - CM1426-06CP

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .02 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: 5 A;

Murata Manufacturing's BLM18KG601SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.15 ohm and output impedance of 600 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 1.3A and is commonly used in electronic devices requiring noise suppression on data lines.

MMZ2012S102AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.35 ohm and rated current of 0.5 A, making it suitable for surface mount applications in electronic devices requiring noise suppression.

EMIF02-USB03F2 by STMicroelectronics is a DATA LINE FILTER with 2 functions and 11 terminals. It has a capacitance of 20uF, operates b/w -40 to 85°C, and uses matte tin finish. Ideal for applications requiring IEC approvals in surface mount configurations.

TDK's MPZ1608D101BTD25 is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 100 ohms and max DC resistance of 0.15 ohm. Ideal for data line filtering applications due to its compact size and operating temperature range from -55°C to 125°C.

The TDK MPZ2012S102AT000 is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. It has a DC resistance of 0.15 ohm, output impedance of 1000 ohm, and rated current of 1.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.

FERRITE CHIP; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A; No. of Terminals: 2;

Murata's NFM41CC222R2A3L is a data line filter with 100V rated voltage, 2200uF capacitance, and -55 to 125°C operating temperature range. It features FEED THROUGH CAPACITOR type and is ideal for applications requiring high insulation resistance and surface mounting type.

TDK's MCZ1210AH900L2T is a 2-function data line filter with 10 Mohm min insulation resistance and 5V rated voltage. With dimensions of L1.25xB1.0xH0.5 mm, it operates b/w -40 to 85 °C, ideal for surface mount applications requiring a max DC resistance of 1.75 ohm and an output impedance of 90 ohm at 0.1A current rating.

TDK's MPZ2012S101AT is an 0805 chip bead filter with 2 terminals. With a max operating temp of 125°C and min freq of 100 MHz, it offers low DC resistance at 0.02 ohm. Ideal for data line filtering applications, this ferrite chip measures L2.0xB1.25xH0.85 mm and has a rated current of 4A.

PA3747.306NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. It has an inductance of 19500 uH, max operating temperature of 125°C, and rated current of 0.75 A. Ideal for applications requiring high output impedance and through hole mounting.

Laird Technologies' HZ0603B102R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.6 ohm and output impedance of 1000 ohm for frequencies ranging from 25MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.

Murata Manufacturing's BLM15PX221SN1D is a FERRITE CHIP data line filter with 220 ohm output impedance, 0.1 ohm max DC resistance, and 0.5mm width. It operates b/w -55°C to 125°C, suitable for surface mount applications in various electronic devices requiring noise suppression and signal filtering capabilities.

FEED THROUGH CAPACITOR; Rated Current: 10 A; Manufacturer Series: 2463-002; Diameter (mm): 2.51; Dimensions: D2.51XL3.94 (mm)/D0.099XL0.155 (inch); Mounting Type: THROUGH HOLE MOUNT;

The Wurth Elektronik 742792011 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a max frequency of 1000 MHz. Ideal for applications requiring noise suppression in electronic circuits.

BKP1608HS121-T by Taiyo Yuden is a 0603 multilayer chip data line filter with 2 terminals. Featuring ferrite chip construction, it has a max operating temp of 85°C and min freq of 100 MHz. Ideal for applications requiring a compact surface mount filter with an output impedance of 120 ohm.

Murata Manufacturing's BLM18PG330SN1D is a chip bead data line filter with 2 terminals, rated for 3A current. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55°C to 125°C and offers an output impedance of 33Ω at frequencies ranging from 100MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.

Vicor's 36-00037 Data Line Filter features 2 functions, 330uH inductance, and a rated current of 20A. With a diameter of 24.89mm and height of 12.7mm, it is ideal for applications requiring noise suppression in data lines with a max DC resistance of 0.0045 ohm.

FERRITE CHIP; Maximum DC Resistance: .03 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A; Output Impedance (ohm): 60 OHM;

Taiyo Yuden's FBMJ3216HS800-T8 is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 80 ohms, operates b/w -40°C to 125°C, and has a compact size of 3.2mm x 1.6mm x 1.1mm. Ideal for surface mount applications requiring effective noise suppression in data lines.