Onsemi - CM1443-04CP

FERRITE CHIP; Maximum DC Resistance: .05 ohm; Rated Current: 2 A; Dimensions: L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch); Height: .8 mm; No. of Terminals: 2;

DATA LINE FILTER; Maximum DC Resistance: .0007 ohm; Rated Current: 15 A; No. of Terminals: 4; Height: 2.85 mm; Output Impedance (ohm): 60 OHM;

DATA LINE FILTER; Maximum DC Resistance: .6 ohm; Mounting Type: THROUGH HOLE MOUNT; Height: 8.89 mm; No. of Functions: 2; Dimensions: L10.16XB5.08XH8.89 (mm)/L0.4XB0.2XH0.35 (inch);

Murata Manufacturing's BLM31PG500SN1L is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L3.2XB1.6XH1.1 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.025 ohm. Ideal for applications requiring a 50 OHM output impedance, this ferrite chip filter is designed for surface mount installation in various electronic devices.

Murata Manufacturing's BLM21PG331SN1B is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.07 ohm, output impedance of 330 OHM, and rated current of 1 A. Ideal for data line filtering applications due to its ferrite construction and surface mounting type.

Murata Manufacturing's DLW21HN670SQ2L is a data line filter with 2 functions, rated voltage of 50V, and insulation resistance of 10 Mohm. It operates b/w -40 to 85 °C and has dimensions of L2.0xB1.2xH0.9 mm. Ideal for applications requiring a DC resistance of 0.35 ohm and output impedance of 67 OHM in surface mount configurations.

DATA LINE FILTER; Maximum DC Resistance: 48 ohm; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; No. of Functions: 1; Width (mm): 1.35; Approvals (V): IEC;

MMZ2012Y152BT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a max DC resistance of 0.4 ohm, output impedance of 1500 ohm, and rated current of 0.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.

Murata Manufacturing's BLM18KG601SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.15 ohm and output impedance of 600 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 1.3A and is commonly used in electronic devices requiring noise suppression on data lines.

BLM31PG601SN1L by Murata is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55 to 125 °C, with dimensions of L3.2xB1.6xH1.1 mm and is used in surface mount applications for filtering frequencies up to 100 MHz.

Murata BL01RN1A2A2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range, and 3.6mm diameter. It is used for noise suppression in electronic circuits through hole mounting applications.

Fair-rite Products' 2744041447 is a surface mount FERRITE BEAD filter with dimensions of L5.6xB5xH2.85 (mm). It operates b/w -55 to 125 °C, has a max frequency of 250 MHz, and output impedance of 33 OHM. Ideal for data line filtering applications due to its encapsulated construction and rated current of 5 A.

FEED THROUGH CAPACITOR; Rated Current: 20 A; No. of Terminals: 2; JESD-609 Code: e4; Mounting Type: PANEL MOUNT; Minimum Insulation Resistance: 10000 Mohm;

The Wurth Elektronik 742792011 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a max frequency of 1000 MHz. Ideal for applications requiring noise suppression in electronic circuits.

Murata Manufacturing's NFM3DCC471R1H3L is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 470uF capacitance. It is a feed-through capacitor suitable for surface mount applications in various electronic devices operating b/w -55 to 125 °C.

HI1206T500R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. It operates b/w -40 to 125 °C, has a DC resistance of 0.01 ohm, and output impedance of 50 OHM. Ideal for applications requiring surface mount filters in the frequency range of 25-1000 MHz.

BKP2125HS600-TV by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals, rated for 3A current. It offers a max DC resistance of 0.025 ohm and an output impedance of 60 ohm. Ideal for surface mount applications in electronics, it operates b/w -55 to 85 °C temperatures.

Wurth Elektronik 7427927112 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.35A. It operates b/w -55 to 125°C, has a DC resistance of 0.35 ohm, and an output impedance of 120Ω. Ideal for surface mount applications in electronics to reduce electromagnetic interference.

Murata Manufacturing's BLM21AG221SN1D is an 0805 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering, this ferrite chip has a DC resistance of 0.13 ohm and output impedance of 220 ohm.

Yageo CX1206MKX7R9BB104 is a FEED THROUGH CAPACITOR with 4 terminals, rated at 50V. It offers high insulation resistance of 10000 Mohm and capacitance of 100000 uF. Ideal for data line filtering applications, it operates b/w -55 to 125 °C, making it suitable for various electronic devices.