Onsemi - CM1457-06CP

FBMH4532HM681-T by Taiyo Yuden is a chip bead data line filter with 1 function. It has a max operating temperature of 125°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.

CM1402-03CP by Onsemi is a data line filter with 5 functions and 10 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This surface mount filter has dimensions of L2.005XB1.375XH0.714 (mm) and is suitable for applications requiring a capacitance of 20 uF and an output impedance of 50 ohm.

FBMH3216HM221NT by Taiyo Yuden is a chip bead data line filter with dimensions of 3.2x1.6x1.6mm, suitable for surface mount applications. It offers an output impedance of 220Ω, rated current of 4A, and operates b/w -40°C to 125°C. Ideal for noise suppression in circuits with frequencies ranging from 100MHz and DC resistance of 0.02Ω.

Semtech's ECLAMP2456P.TCT is a 5V data line filter with 6 functions and 12 terminals. It offers 40 dB attenuation at 2700 MHz, operating from -40 to 85°C. Ideal for applications requiring surface mount filters with dimensions of L3.1xB1.7xH0.65 mm in plastic packaging on tape and reel.

Murata Manufacturing's BLM18BB331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 330Ω and max DC resistance of 0.58Ω. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.4A and is commonly used in electronic devices for noise suppression at frequencies up to 100MHz.

HR2220V801R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers an output impedance of 800 OHM, rated current of 8 A, and DC resistance of 0.01 ohm. Ideal for surface mount applications in filtering frequencies from 25 MHz to 1000 MHz.

DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .7 A; No. of Terminals: 4; Mounting Type: SURFACE MOUNT; Width (mm): 5.9;

Laird Technologies' 35F0121-0SR-10 is a chip bead data line filter with 2 terminals, rated for 10A current. With dimensions of L4.06XB3.05XH2.54 mm, it operates b/w -45 to 125 °C and offers an output impedance of 36 OHM. Ideal for surface mount applications, this filter has a max frequency of 13 MHz and DC resistance of 0.0008 ohm.

Wurth Elektronik 742792064 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.3A current. It operates b/w -55 to 125 °C and has a max DC resistance of 0.2 ohm. Ideal for applications requiring a compact surface mount filter with 75 OHM output impedance.

The TDK ACT45B-510-2P-TL001 is a data line filter with 2 functions, rated at 50V and 0.2A. It offers a min insulation resistance of 10 Mohm and operates b/w -40 to 150 °C. Ideal for applications requiring noise suppression in data lines.

742792021 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with dimensions of L2.0XB1.2XH0.9 (mm). It has a Max Operating Temperature of 125°C and Min Frequency of 100 MHz, suitable for surface mount applications in electronic circuits requiring noise suppression and signal filtering up to 1000 MHz.

Taiyo Yuden's FBMH1608HM601-T is a chip bead data line filter with 2 terminals, rated for 0.7A current and 600 ohm output impedance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -40°C to 85°C, ideal for noise suppression in high-frequency applications up to 100MHz.

Murata Manufacturing's BLM18SG121TN1 is a FERRITE CHIP data line filter with 120 OHM output impedance, 3A rated current, and -55 to 125 °C operating temperature range. Ideal for surface mount applications requiring effective noise suppression in electronic circuits.

FEED THROUGH CAPACITOR; Rated Current: 10 A; Manufacturer Series: 2463-002; Diameter (mm): 2.51; Dimensions: D2.51XL3.94 (mm)/D0.099XL0.155 (inch); Mounting Type: THROUGH HOLE MOUNT;

7448229004 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 350uH, making it suitable for applications requiring noise suppression in data lines.

NUF6400MNTBG by Onsemi is a 6-function data line filter with 30 dB attenuation at 800 MHz. It operates b/w -40 to 85 °C and has a max DC resistance of 115 ohm. Ideal for applications requiring noise filtering in data transmission systems.

TDK's MMZ1608R301ATA00 is a 0603 chip bead filter with max operating temp of 125°C and min of -55°C. With dimensions L1.6xB0.8xH0.8 (mm), it has output impedance of 300Ω, ideal for data line filtering applications.

Murata Manufacturing's DLP2ADA900HL4L is a 5V DATA LINE FILTER with 4 functions and 8 terminals. It offers a min insulation resistance of 100 Mohm, rated current of 0.12A, and max operating temperature of 85°C. Ideal for applications requiring high impedance filtering in compact spaces.

BK2125HM102-T by Taiyo Yuden is a chip bead data line filter with 400V rated voltage, -55 to 125°C operating temperature range, and 1000 ohm output impedance. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100MHz.

Taiyo Yuden's FBMH3225HM102NTV is a Ferrite Chip Data Line Filter with 2 terminals, rated for 2A current. It operates b/w -40°C to 125°C, offering a max DC resistance of 0.1 ohm and an output impedance of 1000 ohm. Ideal for surface mount applications requiring effective noise filtering in compact spaces.