Onsemi - CM6205

Taiyo Yuden's FBMJ3216HM600-T is a chip bead data line filter with 2 terminals, rated for 4A current. Featuring ferrite chip construction, it offers 60 ohm output impedance and operates b/w -40 to 85°C. Ideal for surface mount applications in filtering frequencies up to 100 MHz.

RB8532-16-1M3 by Schaffner Holding Ag is a Data Line Filter with 3 functions, rated voltage of 1000V, and inductance of 1300uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.0057 ohm. Ideal for applications requiring noise suppression in data lines.

HI0805R800R-10 by Laird Technologies is a chip bead data line filter with 80 OHM output impedance. It operates b/w -40 to 125 °C, suitable for frequencies ranging from 25 MHz to 1000 MHz. With dimensions of L2.0XB1.25XH0.9 (mm), it is ideal for surface mount applications in various electronic devices.

Wurth Elektronik 74279274 is a multi-layer FERRITE CHIP filter with dimensions of L1.0XB0.5XH0.5 (mm). It operates b/w -55 to 125 °C, has a DC resistance of 0.25 ohm, and an output impedance of 30 OHM. Ideal for data line filtering applications up to 500 MHz frequency range.

BLM15HB121SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines, with dimensions of L1.0XB0.5XH0.5 (mm) and a rated current of 0.3 A.

Semtech's ECLAMP2422N.TCT is a 5V data line filter with 2 functions and 6 terminals. It operates b/w -40°C to 85°C, offering 0.003uH inductance and 100uF capacitance. Ideal for IEC-approved applications requiring surface mount filters with dimensions of L1.45xB1.0xH0.58mm.

Murata Manufacturing's DLW31SN222SQ2L is a Data Line Filter with 2 functions, rated at 50V. It offers a max DC resistance of 1.2 ohm and an output impedance of 2200 ohm. This surface mount filter operates b/w -40 to 85 °C and is ideal for applications requiring high insulation resistance.

Murata Manufacturing's BNX003-01 is a data line filter with 3 functions, rated at 150V and 10A. It offers a max insertion loss of 40 dB and operates b/w -30 to 85°C. Ideal for applications requiring high insulation resistance and low DC resistance in a compact through-hole mount design.

The TDK MPZ1608B471ATA00 is a Ferrite Chip Data Line Filter with 2 terminals, rated for 1A current. It offers an output impedance of 47 ohms and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring effective filtering in compact spaces.

TDK MMZ1608B102CTA00 is a chip bead data line filter with 2 terminals. It offers a max DC resistance of 0.6 ohm and an output impedance of 1000 ohm. Ideal for surface mount applications, it operates b/w -55 to 125 °C and has a rated current of 0.3 A.

Wurth Elektronik 742792063 is a FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with a frequency range of 100-500 MHz. With dimensions of L2.0XB1.2XH0.9 mm, it has a DC resistance of 0.025 ohm and output impedance of 60 OHM.

Murata Manufacturing's DSS6NZ82A103Q55B is a 100V rated data line filter with 6A current capacity. It operates b/w -25°C to 85°C, measuring L8xB2.54xH7 mm in size. Ideal for applications requiring noise suppression in data lines, it offers a capacitance of 10000uF and through-hole mounting method.

The TDK MPZ1608S221AT is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1.6x0.8x0.8mm, it offers a max operating temperature of 125°C and DC resistance of 0.05 ohm. This ferrite chip filter has an output impedance of 220 ohm and is suitable for frequencies ranging from 100 MHz, making it perfect for noise suppression in electronic circuits.

TDK's MPZ2012S101ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 4A current. With dimensions of L2.0xB1.25xH0.85 (mm), it operates b/w -55 to 125 °C and has a max DC resistance of 0.02 ohm. Ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.

The TDK MMZ2012R102AT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.3 ohm and output impedance of 1000 OHM, suitable for surface mount applications in various electronic devices.

Murata Manufacturing's BLM18PG121SN1 is a FERRITE CHIP data line filter with 120 OHM output impedance, 2A rated current, and -55 to 125 °C operating temperature range. It is designed for surface mount applications requiring effective filtering in compact spaces.

Murata Manufacturing's BLM18KG331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 0.08 ohm and output impedance of 330 OHM at 100 MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression.

Murata Manufacturing's BLM31PG500SN1L is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L3.2XB1.6XH1.1 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.025 ohm. Ideal for applications requiring a 50 OHM output impedance, this ferrite chip filter is designed for surface mount installation in various electronic devices.

Murata's BLM18EG101TN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. It offers a DC resistance of 0.045 ohm, output impedance of 140Ω, and rated current of 2A. Ideal for surface mount applications in filtering frequencies from 100MHz to 1000MHz.

Murata Manufacturing's BLM31SN500SH1L is a FERRITE CHIP filter with 2 terminals, AEC-Q200 compliant. It operates b/w -55°C to 125°C, has a DC resistance of 0.0016 ohm, and rated current of 12A. Ideal for data line filtering applications with an output impedance of 50 OHM.