Onsemi - MCR16D

MCR16D by Onsemi

Image shown is a representation only.

Manufacturer	Onsemi
Manufacturer's Part Number	MCR16D
Description	SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 400 V; Maximum Holding Current: 40 mA; Maximum DC Gate Trigger Current: 20 mA; Minimum Critical Rate of Rise of Off-state Voltage: 50 V/us;
Datasheet	MCR16D Datasheet
In Stock	183

MCR16D Technical Details

NAME	DESCRIPTION
Trigger Device Type:	SCR
Sub-Category:	Silicon Controlled Rectifiers
Surface Mount:	NO
Maximum Leakage Current:	2 mA
Maximum On-state Voltage:	1.7 V
Minimum Operating Temperature:	-40 Cel
Non Repetitive Peak On-state Current:	160 A
Maximum DC Gate Trigger Voltage:	1 V
Minimum Critical Rate of Rise of Off-state Voltage:	50 V/us
Maximum Holding Current:	40 mA
Maximum DC Gate Trigger Current:	20 mA
Maximum On-state Current:	16 A
Maximum Operating Temperature:	125 Cel
Repetitive Peak Off-state Voltage:	400 V

Pricing (USD)

Qty.	Unit Price	Ext. Price
183	-	-

Popular Products

LAN8720AI-CP-TR

Microchip Technology

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

DRV5053VAQLPG

Texas Instruments

Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

2N7002

Central Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;

MBR1560CT

General Instrument

MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.

2N2222A

Swampscott Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

1N4148WS

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Category Top Products