NV24RF16EDTVT3G by Onsemi | Memory ICs

Image shown is a representation only.

Manufacturer	Onsemi
Manufacturer's Part Number	NV24RF16EDTVT3G
Description	EEPROM; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Screening Level: AEC-Q100;
Datasheet	NV24RF16EDTVT3G Datasheet
In Stock	1,805

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Standby Current:	.000001 Amp
Organization:	512X32
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	1.2 mm
Minimum Supply Voltage (Vsup):	1.8 V
Surface Mount:	YES
Maximum Supply Current:	.4 mA
Maximum Write Cycle Time (tWC):	5 ms
No. of Terminals:	8
I2C Control Byte:	1010D11R
Maximum Clock Frequency (fCLK):	1 MHz
No. of Words:	512 words
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Screening Level:	AEC-Q100
Write Protection:	SOFTWARE
Technology:	CMOS
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Operating Mode:	SYNCHRONOUS
Maximum Operating Temperature:	125 Cel
Endurance:	2000000 Write/Erase Cycles
Package Code:	TSSOP
Width:	4.4 mm
Serial Bus Type:	I2C
Memory Density:	16384 bit
Memory IC Type:	EEPROM
Minimum Operating Temperature:	-40 Cel
Memory Width:	32
No. of Functions:	1
Package Equivalence Code:	TSSOP8,.25
Alternate Memory Width:	8
Length:	3 mm
Maximum Access Time:	400 ns
No. of Words Code:	512
Nominal Supply Voltage / Vsup (V):	2.5
Minimum Data Retention Time:	200
Peak Reflow Temperature (C):	NOT SPECIFIED
Parallel or Serial:	SERIAL
Terminal Pitch:	.65 mm
Temperature Grade:	AUTOMOTIVE
Maximum Supply Voltage (Vsup):	5.5 V
Reverse Pinout:	NO

Pricing (USD)

Qty.	Unit Price	Ext. Price
1,805	-	-

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;

The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.