NV25M01A8UXTG by Onsemi | Memory ICs

Image shown is a representation only.

Manufacturer	Onsemi
Manufacturer's Part Number	NV25M01A8UXTG
Description	EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VFBGA; Package Shape: RECTANGULAR; Organization: 128KX8;
Datasheet	NV25M01A8UXTG Datasheet
In Stock	1,259

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Organization:	128KX8
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	.39 mm
Minimum Supply Voltage (Vsup):	1.8 V
Surface Mount:	YES
Maximum Write Cycle Time (tWC):	5 ms
No. of Terminals:	8
Maximum Clock Frequency (fCLK):	5 MHz
No. of Words:	131072 words
Terminal Position:	BOTTOM
Package Style (Meter):	GRID ARRAY, VERY THIN PROFILE, FINE PITCH
Screening Level:	AEC-Q100
Technology:	CMOS
JESD-30 Code:	R-PBGA-B8
Package Shape:	RECTANGULAR
Terminal Form:	BALL
Operating Mode:	SYNCHRONOUS
Maximum Operating Temperature:	105 Cel
Package Code:	VFBGA
Width:	1.95 mm
Serial Bus Type:	SPI
Memory Density:	1048576 bit
Memory IC Type:	EEPROM
Minimum Operating Temperature:	-40 Cel
Memory Width:	8
No. of Functions:	1
Length:	2.24 mm
No. of Words Code:	128K
Nominal Supply Voltage / Vsup (V):	2.5
Peak Reflow Temperature (C):	NOT SPECIFIED
Parallel or Serial:	SERIAL
Terminal Pitch:	.4 mm
Temperature Grade:	INDUSTRIAL
Maximum Supply Voltage (Vsup):	5.5 V

Pricing (USD)

Qty.	Unit Price	Ext. Price
1,259	-	-

ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.

MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.