OPB700Z by Optek Technology | Sensors & Transducers

Image shown is a representation only.

Manufacturer	Optek Technology
Manufacturer's Part Number	OPB700Z
Description	LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0.10-2.50mA; Maximum Output Voltage: 24 V;
Datasheet	OPB700Z Datasheet

NAME	DESCRIPTION
Maximum Operating Current:	100 mA
Maximum Measurement Range (mm):	5.08 mm
Maximum Supply Voltage:	1.7 V
Output Range:	0.10-2.50mA
Output Type:	ANALOG CURRENT
Maximum Output Voltage:	24 V
Sub-Category:	Position, Linear, Photoelectric Sensors
Housing:	PLASTIC
Output Circuit Type:	Transistor
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE MOUNT
Body Width:	15.24 inch
Sensors or Transducers Type:	LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE
Gap Size:	.00508 mm
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Body Height:	2.54 mm
Body Length/Diameter:	25.4 mm
Maximum Operating Temperature:	100 Cel
Minimum Measurement Range (mm):	5.08 mm
No. of Channels:	1
Maximum VCEsat:	.4 V

Popular Products

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;

AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.