Pepperl+fuchs - NJ1,5-F2-E2-V3

NJ1,5-F2-E2-V3 by Pepperl+fuchs

Image shown is a representation only.

Manufacturer	Pepperl+fuchs
Manufacturer's Part Number	NJ1,5-F2-E2-V3
Description	PROXIMITY SENSOR,INDUCTIVE; Mounting Feature: FLUSH MOUNT; Output Type: PNP; Package Shape or Style: RECTANGULAR; Maximum Supply Voltage: 30 V; Minimum Supply Voltage: 10 V;
Datasheet	NJ1,5-F2-E2-V3 Datasheet

NJ1,5-F2-E2-V3 Technical Details

NAME	DESCRIPTION
Minimum Supply Voltage:	10 V
Maximum Operating Current:	200 mA
Maximum Measurement Range (mm):	1.215 mm
Maximum Supply Voltage:	30 V
Output Type:	PNP
Housing:	POLYAMIDE
Minimum Operating Temperature:	-25 Cel
Mounting Feature:	FLUSH MOUNT
Body Width:	12 inch
Sensors or Transducers Type:	PROXIMITY SENSOR,INDUCTIVE
Package Shape or Style:	RECTANGULAR
Termination Type:	CONNECTOR
Output Interface Type:	3-WIRE INTERFACE
Body Height:	32 mm
Additional Features:	IP67; REVERSE POLARITY PROTECTION; SHORT CIRCUIT PROTECTION
Body Length/Diameter:	31 mm
Maximum Operating Temperature:	70 Cel
Minimum Measurement Range (mm):	0 mm

Popular Products

DRV5053VAQLPG

Texas Instruments

Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.

ERJ3EKF1002V

Panasonic

Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.

BSS138-7-F

Diodes Incorporated

Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

BAV99

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

LM555CMX

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

STM8S003F3P6TR

STMicroelectronics

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

BAV99

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;

L78L05ABZ-AP

STMicroelectronics

L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Category Top Products