SD-FLASH-2GB-EV-EMOB by Phoenix Contact | Memory ICs

Image shown is a representation only.

Manufacturer	Phoenix Contact
Manufacturer's Part Number	SD-FLASH-2GB-EV-EMOB
Description	CONFIGURATION MEMORY; Package Code: DIE; Package Shape: RECTANGULAR; Terminal Form: NO LEAD; Maximum Operating Temperature: 85 Cel; Maximum Supply Voltage (Vsup): 3.6 V;
Datasheet	SD-FLASH-2GB-EV-EMOB Datasheet

NAME	DESCRIPTION
Package Body Material:	UNSPECIFIED
Memory Density:	17179869184 bit
Organization:	2GX8
Programming Voltage (V):	3.3
Minimum Supply Voltage (Vsup):	2.7 V
Surface Mount:	YES
Memory IC Type:	CONFIGURATION MEMORY
Minimum Operating Temperature:	-40 Cel
Memory Width:	8
No. of Functions:	1
Type:	NOR TYPE
No. of Words:	2147483648 words
Package Equivalence Code:	DIE OR CHIP
Terminal Position:	UPPER
Package Style (Meter):	UNCASED CHIP
Technology:	CMOS
No. of Words Code:	2G
JESD-30 Code:	R-XUUC-N
Package Shape:	RECTANGULAR
Terminal Form:	NO LEAD
Nominal Supply Voltage / Vsup (V):	3.3
Maximum Operating Temperature:	85 Cel
Package Code:	DIE
Maximum Supply Voltage (Vsup):	3.6 V

Popular Products

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.

FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;