ODD26F10000 by Positronic Industries | Connectors

Image shown is a representation only.

Manufacturer	Positronic Industries
Manufacturer's Part Number	ODD26F10000
Description	D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-24308; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Minimum Wire Size: 30 AWG;
Datasheet	ODD26F10000 Datasheet

NAME	DESCRIPTION
Mating Contact Finish:	GOLD FLASH OVER NICKEL
Maximum Wire Size:	22 AWG
Contact Design:	PREASSEM CONN
IEC Conformity:	NO
Sub-Category:	D Type Connectors
Empty Shell:	NO
Shell Finish:	ZINC
Minimum Wire Size:	30 AWG
MIL Conformity:	NO
No. of Rows Loaded:	3
Termination Type:	CRIMP
Maximum Operating Temperature (Cel):	125
Body Length:	1.541 inch
Contact Gender:	FEMALE
Connector Type:	D SUBMINIATURE CONNECTOR
Contact Material:	PHOSPHOR BRONZE
Manufacturer Series:	ODD
Mounting Option-1:	HOLE .112-.124
Contact Resistance:	10 mohm
Insulation Resistance:	5000000000 ohm
UL Flammability Code:	94V-0
Mixed Contacts:	NO
Plating Thickness (inch):	FLASH
Contact Style:	RND PIN-SKT
Filter Feature:	NO
Mounting Type:	CABLE
JESD-609 Code:	e4
Body Depth:	.411 inch
Minimum Operating Temperature:	-55 Cel
Total No. of Contacts:	26
Body Width:	.494 inch
Dielectric Withstanding Voltage (V):	1000VAC
Termination Contact Finish:	GOLD FLASH OVER NICKEL
Rated Current - Signal:	5 A
Insulator Material:	GLASS FILLED POLYESTER
Insulator Color:	BLACK
Reference Standard:	UL, CSA
Option:	GENERAL PURPOSE
Contact Pattern:	STAGGERED
Shell Material:	STEEL
Shell Size:	2/A
Body or Shell Style:	PLUG
Reliability:	MIL-C-24308
DIN Conformance:	NO

Popular Products

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;