FASTTRAK TX4000 by Promise Technology

Image shown is a representation only.

Manufacturer Promise Technology
Manufacturer's Part Number FASTTRAK TX4000
Description Promise; Product Model: TX4000; Product Type: Ultra ATA Controller; Host Interface: PCI; Controller Type: Ultra ATA/133 (ATA-7); Certifications & Standards: FCC Class B;
NAME DESCRIPTION
Data Transfer Rate: 266 MB/s
Number of Physical Drive Supported: 4
Certifications & Standards:
  • FCC Class B
  • CE
Number of IDE Ports (Internal): 4
Product Name: TX4000 ATA RAID
Controller Type: Ultra ATA/133 (ATA-7)
Additional Warranty Information:
  • Free Technical Support is available at 408/228-6402 ext. 4 or via Promise's web site at www.promise.com
Limited Warranty: 2 Year
Brand Name: Promise
RAID Supported: Yes
Additional Information:
  • Four independent channels for improved performance
  • Cost-effective, performance-oriented solution
  • Supports specification of Ultra ATA/133 which includes the ability to transfer data at up to 133MB/sec, and advanced CRC error-checking at higher drive speeds
  • Supports 66MHz PCI bus motherboards capable of transferring data up to 266MB per second (backward compatible with 33MHz PCI bus transfers of 133MB/sec)
  • Under RAID 0, FastTrak TX4000 boosts data transfer performance when striping multiple Ultra ATA/133 drives
  • Provides real-time, mirrored RAID (Level 1 and 0+1) to protect data on attached hard drives
  • Supports use of hot spare drive for immediate drive rebuilding in event of drive failure
  • Onboard BIOS recognizes and configures attached drives for optimum speed and full capacity
  • BIOS supports 48-bit large LBA mode to allow use of drives exceeding 137GB each
  • Easy installation and RAID setup lets all users quickly create the type of RAID their environment requires
  • Included Promise Array Management (PAM) utility offers graphical user interface (Windows only) for remote and local array monitoring, and can be configured to send email notification in case of array errors.

    Device Support:
  • Supports Ultra ATA/133 drives
  • Backward compatible with older Ultra ATA Drives

    Data Transfer Rate*:
  • Up to 266MB/sec (66 MHz PCI)
  • Up to 133MB/sec (33 MHz PCI)

    FastBuild BIOS:
  • Optimizes drive performance by drive type
  • Flashable for future upgrades
  • Supports multiple arrays
  • Boots system from any array
  • BBS compliant
  • Setup menus for custom array creation

    Data Protection Features:
  • Mirrors data to second drive or drive pair for RAID 1 and RAID 0+1
  • Offers hot spare support for instant rebuild of failed drive in 2-drive RAID 1

    Advanced Data Features:
  • Bus mastering offloads data I/O handling from host CPU
  • CRC error-checking of Ultra ATA drives for data reliability during transfers
  • Tagged command queuing, elevator seek and packet chain command for optimized data handling

    Promise Array Management:
  • Monitors status of arrays, hard drives, and controller via TCP/IP
  • Warns of drive failure
  • Allows rebuilds of mirrored arrays
  • Synchronizes data in fault-tolerant arrays
  • Email notification for specified array events
  • S.M.A.R.T.-compatible status reporting
  • ACPI Support: S1, S3, & S4

    * Data transfer rates may vary depending on drive make, motherboard, and PCI bus speed
Marketing Information: If you are a desktop power-user who needs the capacity and performance of a four-drive RAID with cost-effective, performance-proven Ultra ATA drives, the FastTrak 4000 is designed to meet your needs. The FastTrak TX4000 provides four independent ATA channels, a solution that is optimized for four-drive RAID implementations.

In a four-drive system, the FastTrak TX4000 bypasses the master-slave implementation used with two-channel controller cards, resulting in improved data throughput and the flexibility of hot-swap support in a RAID 0+1 set-up when paired with Promise's SuperSwap hot-swap drive enclosure.

The FastTrak TX4000 supports RAID 0, RAID 1, and RAID 0+1 configurations.

With a FastTrak TX4000 controller, you also get the benefit of Promise Technology's industry-leading ATA feature set. To assure faster transfers, Promise's ATA software uses sophisticated handling techniques to make data transfers more efficient and minimize overloading the host system CPU and slowing system response. Every Promise controller also supports drive capacities exceeding 137GB. Promise cards can be used on both 33MHz and 66MHz PCI bus motherboards for wider compatibility and improved performance.
Product Type: Ultra ATA Controller
Host Interface: PCI
Maximum Data Transfer Rate: 266
Bootable: Yes
Product Model: TX4000
RAID Levels: 0, 1, 0+1, JBOD
Total Number of IDE Ports: 4