Pulse Electronics - AWCU00453228201XTE

Murata Manufacturing's BLM21PG600SN1L is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L2xB1.25xH0.85 (mm), it offers an output impedance of 60 ohm and max DC resistance of 0.025 ohm. Ideal for data line filtering applications, it operates b/w -55°C to 125°C temperatures in surface mount configurations.

Murata Manufacturing's NFM3DCC221R1H3L is a data line filter with 220uF capacitance, 50V rated voltage, and 0.3A rated current. It features feed through capacitor type and is ideal for applications requiring noise filtering in electronic circuits.

TDK's ACM2012-900-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.4A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics.

Murata Manufacturing's BLM21PG600SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications, this surface mount component has a rated current of 3A and uses ferrite material for effective noise suppression.

Wurth Elektronik 744223 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 500uH and max DC resistance of 0.15 ohm, it's ideal for applications requiring output impedance of 3300 OHM. This surface mount filter operates b/w -40 to 125 °C, making it suitable for various electronic devices.

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .018 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;

Wurth Elektronik 742792042 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C and has a DC resistance of 0.5 ohm. With dimensions of L2.0XB1.2XH0.9 (mm), it offers an output impedance of 600 OHM at frequencies ranging from 100 MHz to 180 MHz.

The TDK MPZ1608S101ATAH0 is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, with dimensions of 1.6x0.8x0.8mm and a max frequency of 100MHz. Ideal for noise suppression in electronic circuits requiring impedance of 100 ohms at frequencies above 100MHz.

Murata Manufacturing's BLM03AX102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 1.25 ohm, output impedance of 1000 OHM, and rated current of 0.2 A. Ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions L0.6XB0.3XH0.3 (mm).

TDK's ACF321825-102-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 140 MHz. It has a rated voltage of 20 V, 0.15 ohm DC resistance, and dimensions of L3.2XB1.8XH2.5 mm. Ideal for data line filtering applications due to its high insulation resistance and compact surface mount design.

Wurth Elektronik 74279221111 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 5.4A current and 110Ω output impedance. Ideal for surface mount applications, it operates b/w -55°C to 125°C, measuring L3.2xB1.6xH1.1mm (L0.126xB0.063xH0.043 inch).

The Laird Technologies CM5441Z161B-10 is a data line filter with 2 functions and 4 terminals. It has a max DC resistance of 0.0003 ohm and an output impedance of 160 OHM, suitable for applications requiring a rated current of 75 A. This through-hole mount filter measures L13.72XB10.41XH15.24 mm and is ideal for use in electronic devices to reduce electromagnetic interference.

Murata Manufacturing's BLM15EG121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 0.095 ohm and output impedance of 120 ohm. Ideal for applications requiring filtering in the frequency range of 100-1000 MHz.

HR2220V801R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers an output impedance of 800 OHM, rated current of 8 A, and DC resistance of 0.01 ohm. Ideal for surface mount applications in filtering frequencies from 25 MHz to 1000 MHz.

Murata Manufacturing's BNX026H01L is a 50V data line filter with AEC-Q200 screening. It features 4 terminals, rated for 15A current, and has an output impedance of 50 ohms. This surface mount filter operates b/w -55°C to 125°C, making it ideal for automotive and industrial applications.

Murata Manufacturing's BNX012-01 is a data line filter with 2 functions and rated voltage of 50V. With max insertion loss of 40dB, it operates b/w -40 to 125 °C. Ideal for applications requiring high insulation resistance and output impedance of 50 OHM.

Wurth Elektronik 744272121 is a Data Line Filter with 2 functions, rated at 80V. It has inductance of 120uH and operates b/w -40 to 125°C. Ideal for applications requiring filtering of data lines, it offers low DC resistance of 0.025 ohm and output impedance of 460Ω.

Vishay Intertechnology's ILHB0603RK600V is a FERRITE CHIP filter with 2 terminals, 60 OHM output impedance, and 2A rated current. Operating b/w -55°C to 125°C, it has a max DC resistance of 0.1 ohm. Ideal for data line filtering in compact surface mount applications.

TDK ACP3225-102-2P-T is a 2-function data line filter with 10 Mohm min insulation resistance, 60V rated voltage, and 1.5A rated current. Ideal for applications requiring noise suppression in data lines with operating temperatures from -40 to 85°C.

TDK's ACM2012-361-2P-T001 is a 2-function data line filter with AEC-Q200 screening. It has a rated voltage of 50V, max operating temp of 105°C, and DC resistance of 0.5 ohm. Ideal for automotive applications due to its compact size (L2.0xB1.2xH1.3 mm) and surface mounting type.