QSIATA by Q-see

Image shown is a representation only.

Manufacturer Q-see
Manufacturer's Part Number QSIATA
Description Q-see; Product Type: Ultra ATA Controller; Host Interface: PCI; Form Factor: Plug-in Card; Controller Type: Ultra ATA/133 (ATA-7), Ultra ATA/100 (ATA-6), Ultra ATA/66 (ATA-5), Ultra ATA/33 (ATA-4), EIDE; Product Name: QSIATA Ultra ATA-133 IDE PCI Card;
NAME DESCRIPTION
Data Transfer Rate: 133 MB/s
Number of Physical Drive Supported: 2
Number of IDE Ports (Internal): 2
Product Name: QSIATA Ultra ATA-133 IDE PCI Card
Controller Type: Ultra ATA/133 (ATA-7), Ultra ATA/100 (ATA-6), Ultra ATA/66 (ATA-5), Ultra ATA/33 (ATA-4), EIDE
Platform Supported: PC
Limited Warranty: 1 Year
Brand Name: Q-see
Form Factor: Plug-in Card
Package Contents:
  • 1 x QSIATA Ultra ATA-133 IDE PCI Card
  • 1 x User Manual
  • 1 x Driver CD
Additional Information:
  • Bus master transfer on the PCI bus and PIO transfer on the ATA bus
  • 256 bytes FIFO per channel
  • Enhanced data integrity of transfered data with CRC (Cyclical Redundancy Check) protection and verification
  • Supports RAID 0 (stripes), RAID 1(mirrored), RAID 0+1(mirrored-striped) by installing the software CMD Medley. (Note: In order to use RAID, the boot drive should be connected to the primary Channel of the ATA133 IDE controller)

To Achieve the highest performances of this Ultra-ATA IDE 133 card:

  • The devices must support ULTRA ATA 133
  • Motherboard and system BIOS must support Ultra ATA ide 133
  • Operating system must support DMA
  • IDE cable must be 80-wires/40 pins and not exceed 18"
Marketing Information:

This ULTRA ATA 133 IDE Controller Card is designed to offer a high performance, cost effective and reliability solution to the system up grader. This card provides 2 IDE connectors that support Ultra ATA 133, Protocols and each IDE connector can support a Master/Slave combination of any devices, including Ultra ATA 133, Ultra ATA 100, Ultra ATA 66, Ultra ATA 33, EIDE/FAST ATA-2, IDE and ATAPI standards.
Product Type: Ultra ATA Controller
Host Interface: PCI
System Requirements:
  • One available PCI expansion slot
  • CD-ROM
Compatibility:
  • Plug and Play

Supported Operating System:

  • Windows 98
  • Windows 98SE
  • Windows Me
  • Windows NT4.0
  • Windows 2000
  • Windows XP
Total Number of IDE Ports: 2