REC3-2405DR/H1 by Recom Power | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	Recom Power
Manufacturer's Part Number	REC3-2405DR/H1
Description	DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: OTHER; No. of Terminals: 12; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Datasheet	REC3-2405DR/H1 Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Nominal Output Voltage:	5 V
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Trim or Adjustable Output (V):	NO
Width (mm):	20.3 mm
Maximum Seated Height:	10.7 mm
Maximum Output Current:	.3 A
Maximum Total Power Output:	1.5 W
Sub-Category:	Other Analog ICs
Surface Mount:	NO
No. of Outputs:	2
No. of Terminals:	12
Terminal Position:	DUAL
Package Style (Meter):	MICROELECTRONIC ASSEMBLY
Maximum Load Regulation:	1 %
Technology:	HYBRID
JESD-30 Code:	R-PDMA-T12
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	80 Cel
Package Code:	DIP
Minimum Output Voltage:	4.85 V
Minimum Input Voltage:	20.4 V
Maximum Input Voltage:	27.6 V
Maximum Output Voltage:	5.15 V
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	DIP12/24,.6
Nominal Input Voltage:	24 V
Other IC type:	DC-DC REGULATED POWER SUPPLY MODULE
Length:	32 mm
Additional Features:	ADDITIONAL -5 VOLT OUTPUT VOLTAGE ALSO AVAILABLE
Peak Reflow Temperature (C):	NOT SPECIFIED
Terminal Pitch:	2.54 mm
Temperature Grade:	OTHER

Popular Products

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;

DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;