RPP30-2405SW by Recom Power | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	Recom Power
Manufacturer's Part Number	RPP30-2405SW
Description	DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO;
Datasheet	RPP30-2405SW Datasheet

NAME	DESCRIPTION
Package Body Material:	METAL
Maximum Line Regulation:	.3 %
Nominal Output Voltage:	5 V
Maximum Time At Peak Reflow Temperature (s):	5
Trim or Adjustable Output (V):	YES
Protection(s):	OUTPUT OVER VOLTAGE; THERMAL
Width (mm):	30.5 mm
Maximum Seated Height:	11.76 mm
Maximum Output Current:	6 A
Maximum Total Power Output:	30 W
Surface Mount:	NO
No. of Outputs:	1
No. of Terminals:	6
Terminal Position:	DUAL
Package Style (Meter):	MICROELECTRONIC ASSEMBLY
Maximum Load Regulation:	.5 %
Technology:	HYBRID
JESD-30 Code:	R-MDMA-P6
Package Shape:	RECTANGULAR
Terminal Form:	PIN/PEG
Maximum Operating Temperature:	115 Cel
Height:	11.68 mm
Package Code:	DMA
Minimum Output Voltage:	4.5 V
Other Names:	30900386 945-1294 RPP302405SW
Minimum Input Voltage:	9 V
Warm-Up Time:	.02 Seconds
Maximum Input Voltage:	36 V
Maximum Output Voltage:	5.5 V
Approvals (V):	EN, IEC, UL
Minimum Operating Temperature:	-45 Cel
No. of Functions:	1
Package Equivalence Code:	MODULE,6LEAD,1.8
Nominal Input Voltage:	24 V
Other IC type:	DC-DC REGULATED POWER SUPPLY MODULE
Length:	50.8 mm
Main Out Ripple Voltage:	.03535 Vrms
Peak Reflow Temperature (C):	255
Main Output Efficiency:	90 %
Temperature Grade:	INDUSTRIAL

Popular Products

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.