HA11556NT by Renesas Electronics | General Purpose ICs

Image shown is a representation only.

Manufacturer	Renesas Electronics
Manufacturer's Part Number	HA11556NT
Description	CONSUMER CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 22; Package Code: SDIP; Package Shape: RECTANGULAR;
Datasheet	HA11556NT Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Seated Height:	5.06 mm
Minimum Supply Voltage (Vsup):	9 V
Surface Mount:	NO
Minimum Operating Temperature:	-15 Cel
No. of Functions:	1
No. of Terminals:	22
Qualification:	Not Qualified
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE, SHRINK PITCH
Length:	19.2 mm
JESD-30 Code:	R-PDIP-T22
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	65 Cel
Package Code:	SDIP
General IC Type:	CONSUMER CIRCUIT
Width:	7.62 mm
Terminal Pitch:	1.778 mm
Temperature Grade:	COMMERCIAL
Maximum Supply Voltage (Vsup):	9 V

Popular Products

FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.

2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.