UPD168112K9-5B4-A by Renesas Electronics | Interface ICs

Image shown is a representation only.

Manufacturer	Renesas Electronics
Manufacturer's Part Number	UPD168112K9-5B4-A
Description	HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet	UPD168112K9-5B4-A Datasheet

NAME	DESCRIPTION
Minimum Supply Voltage:	2.7 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	2.7 V
Maximum Time At Peak Reflow Temperature (s):	10
Maximum Seated Height:	.75 mm
Surface Mount:	YES
Terminal Finish:	TIN BISMUTH
No. of Terminals:	48
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Technology:	MOS
JESD-30 Code:	S-PQCC-N48
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Built-in Protections:	TRANSIENT; THERMAL; UNDER VOLTAGE
Maximum Operating Temperature:	75 Cel
Package Code:	HVQCCN
Interface IC Type:	HALF BRIDGE BASED PERIPHERAL DRIVER
Width:	7 mm
Turn-off Time:	2 us
Maximum Supply Voltage-1:	5.5 V
Moisture Sensitivity Level (MSL):	4
Maximum Supply Voltage:	3.6 V
Turn-on Time:	2 us
JESD-609 Code:	e6
Minimum Operating Temperature:	-10 Cel
No. of Functions:	6
Qualification:	Not Qualified
Output Current Flow Direction:	SOURCE
Length:	7 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	COMMERCIAL EXTENDED

Popular Products

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.