UPD800261F1-523-HN2-A by Renesas Electronics | Peripheral ICs

Image shown is a representation only.

Manufacturer	Renesas Electronics
Manufacturer's Part Number	UPD800261F1-523-HN2-A
Description	SERIAL IO/COMMUNICATION CONTROLLER, LAN; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 304; Package Code: FBGA; Package Shape: SQUARE;
Datasheet	UPD800261F1-523-HN2-A Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Peripheral IC Type:	SERIAL IO/COMMUNICATION CONTROLLER, LAN
Nominal Supply Voltage:	1.5 V
Sub-Category:	Serial IO/Communication Controllers
Surface Mount:	YES
Maximum Supply Current:	535 mA
Minimum Operating Temperature:	-40 Cel
No. of Terminals:	304
Qualification:	Not Qualified
Package Equivalence Code:	BGA304,22X22,32
Terminal Position:	BOTTOM
Package Style (Meter):	GRID ARRAY, FINE PITCH
Technology:	MOS
JESD-30 Code:	S-PBGA-B304
Package Shape:	SQUARE
Terminal Form:	BALL
Maximum Operating Temperature:	85 Cel
Package Code:	FBGA
Terminal Pitch:	.8 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	1.5

Popular Products

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;

SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;