DTA114YETL by ROHM | Transistors

Image shown is a representation only.

Manufacturer	ROHM
Manufacturer's Part Number	DTA114YETL
Description	PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .15 W; Maximum Collector Current (IC): .1 A;
Datasheet	DTA114YETL Datasheet

NAME	DESCRIPTION
Nominal Transition Frequency (fT):	250 MHz
Package Body Material:	PLASTIC/EPOXY
Maximum Collector Current (IC):	.1 A
Maximum Time At Peak Reflow Temperature (s):	10
Configuration:	SINGLE WITH BUILT-IN RESISTOR
Transistor Element Material:	SILICON
Transistor Application:	SWITCHING
Sub-Category:	BIP General Purpose Small Signal
Surface Mount:	YES
No. of Terminals:	3
Maximum Power Dissipation (Abs):	.15 W
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G3
No. of Elements:	1
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	150 Cel
Maximum Power Dissipation Ambient:	.15 W
Moisture Sensitivity Level (MSL):	1
Polarity or Channel Type:	PNP
Minimum DC Current Gain (hFE):	68
Qualification:	Not Qualified
Maximum Collector-Emitter Voltage:	50 V
Additional Features:	BUILT-IN BIAS RESISTOR RATIO IS 4.7
Peak Reflow Temperature (C):	260
Maximum VCEsat:	.3 V

Popular Products

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.

SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;