1241.1022 by Schurter Ag | Switches

Image shown is a representation only.

Manufacturer	Schurter Ag
Manufacturer's Part Number	1241.1022
Description	KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): LONG TYPE; Maximum Operating Temperature: 85 Cel; Body Height: 7.75 mm;
Datasheet	1241.1022 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.05 A
Center Contact Plating:	GOLD OVER NICKEL
Maximum Contact Bounce Time:	.1 ms
Center Contact Material:	BRASS
Type (Actuator):	LONG TYPE
Actuator Travel (mm):	0.45
Switch Action:	MOMENTARY-TACTILE
Termination Type:	SOLDER
Electrical Life:	1000000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Material (Actuator):	POLYCARBONATE
Contact Resistance:	50 mohm
Insulation Resistance:	100000000 ohm
End Contact Material:	BRASS
Maximum DC Contact Voltage:	24 V
DC Maximum Rating R Load (Contact):	.05A@24VDC
PCB Hole Count:	4
Maximum Operating Force:	3 N
DC Maximum Power Rating R Load (Contact):	0.48VA@24VDC
Switch Type:	KEYPAD SWITCH
Sealing:	IP40
Minimum Operating Temperature:	-25 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Body Width:	12.65 inch
Switch Function:	SPST
Circuit Config:	1X1
Terminal Length:	.126 inch
End Contact Plating:	GOLD OVER NICKEL
Body Height:	7.75 mm
Body Length/Diameter:	12.65 mm
No. of Switches:	1

Popular Products

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.

MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;