8D147S0 by Seagate Technology

Image shown is a representation only.

Manufacturer Seagate Technology
Manufacturer's Part Number 8D147S0
Description Hard Drives/Solid State Drives; Brand Name: Maxtor; Product Line: Atlas; Product Type: Hard Drive; Storage Capacity: 147.1 GB; Drive Type: Internal;
NAME DESCRIPTION
Data Transfer Rate: 3 GB/s, 89 MB/s
Certifications & Standards:
  • S.M.A.R.T
Spindle Speed (rpm): 10000
Depth: 5.787 "
Drive Height: 1/3H
Form Factor: 3.5"
Additional Information:
  • SAS Interface Bandwidth: 600 MB/s
  • Bytes Per Sector: 512, 514, 516, 518, 520, 522, 524
  • MTTF: 1.4 million hours
  • Case Temperature: 60 (°C) Maximum Operating
  • Rotational Vibration: 25 (rad/sec2) Operating

Rotational Shock:

  • 7,000 (rad/sec2) Operating
  • 25,000 (rad/sec2) Non-Operating

Higher System Availability:

  • Dual port provides two data paths to each disk drive increasing the drive's availability
  • Multi-initiator capability enables multiple hosts to access a drive simultaneously
  • Point-to-point connectivity for better fault isolation

End User Flexibility:

  • Configuration flexibility allow end-users to mix and match SAS and SATA drives to fit their specific application
  • SAS back-planes can accommodate dual port / high performance SAS drives and/or high capacity / lower cost SATA drives

Performance:

  • Up to 128 queue depth support for improved IOPS performance
  • Full duplex capability allow drives to send and receive data for two different IO operations simultaneously
  • Point-to-point connectivity eliminates the bottleneck inherent with a shared/arbitrated bus
  • Scalable bandwidth via wide ports
  • Rate matching supports 1.5Gbs SATA and 3.0Gbs SAS drives for optimal performance

SCSI Investment Protection:

  • Employs the SCSI command set to maintain compatibility with existing SCSI infrastructures

MaxAdapt Features:

  • Adaptive Bias Estimation (ABE)-Maintains consistent performance by adjusting the bias applied to the actuator
  • Virtual Cache Lines (VCL)-Allows dynamic assignment of cache segments
  • Rotational Vibration Compensation (RVC)-Monitors and corrects for external vibration

Atlas 10K V SAS Best-Fit:

  • Large Enterprise NAS/SAN Servers
  • Mainstream NAS/SAN
  • Workstations
  • Direct Attached JBOD Storage
  • Direct Attached RAID Storage
Height: 1.028 "
Storage Capacity: 147.1 GB
Width: 4 "
Drive Interface: SAS
Buffer: 16 MB
Weight (Approximate): 1.8 lb
Drive Interface Standard: 3Gb/s SAS
Product Name: Atlas 10K V SAS Hard Drive
Input Voltage: 5 V DC
Maximum External Data Transfer Rate: 300 MB/s
Drive Type: Internal
SAS Pin: 7-pin
Limited Warranty: 5 Year
Latency: 3 ms
Brand Name: Maxtor
Average Latency: 3 ms
Marketing Information:

The Maxtor Atlas 10K V SAS delivers the industry's highest capacity point Serial Attached SCSI (SAS) drive with a 16MB cache, as fast as 4.2 msec seek time and 89MB/sec sustained data transfer rate, providing an optimal combination for use on mainstream enterprise solutions.
Product Type: Hard Drive
Bytes Per Sector: 512
Product Line: Atlas