8E147S0 by Seagate Technology

Image shown is a representation only.

Manufacturer Seagate Technology
Manufacturer's Part Number 8E147S0
Description Hard Drives/Solid State Drives; Brand Name: Maxtor; Product Line: Atlas; Product Type: Hard Drive; Storage Capacity: 147.1 GB; Additional Information: SAS Interface Bandwidth: 600 MB/s;
NAME DESCRIPTION
Data Transfer Rate: 3 GB/s, 98 MB/s
Certifications & Standards:
  • S.M.A.R.T
Spindle Speed (rpm): 15000
Depth: 5.787 "
Drive Height: 1/3H
Form Factor: 3.5"
Additional Information:
  • SAS Interface Bandwidth: 600 MB/s
  • Bytes Per Sector: 512, 514, 516, 518, 520, 522, 524
  • MTTF: 1.4 million hours
  • Case Temperature: 60 (°C) Maximum Operating
  • Rotational Vibration: 25 (rad/sec2) Operating

Rotational Shock:

  • 7,000 (rad/sec2) Operating
  • 25,000 (rad/sec2) Non-Operating

Higher System Availability:

  • Dual port provides two data paths to each disk drive increasing the drive's availability
  • Multi-initiator capability enables multiple hosts to access a drive simultaneously
  • Point-to-point connectivity for better fault isolation

End User Flexibility:

  • Configuration flexibility allow end-users to mix and match SAS and SATA drives to fit their specific application
  • SAS back-planes can accommodate dual port / high performance SAS drives and/or high capacity / lower cost SATA drives

Performance:

  • Up to 128 queue depth support for improved IOPS performance
  • Full duplex capability allow drives to send and receive data for two different IO operations simultaneously
  • Point-to-point connectivity eliminates the bottleneck inherent with a shared/arbitrated bus
  • Scalable bandwidth via wide ports
  • Rate matching supports 1.5Gbs SATA and 3.0Gbs SAS drives for optimal performance

SCSI Investment Protection:

  • Employs the SCSI command set to maintain compatibility with existing SCSI infrastructures

MaxAdapt Features:

  • Adaptive Bias Estimation (ABE)-Maintains consistent performance by adjusting the bias applied to the actuator
  • Virtual Cache Lines (VCL)-Allows dynamic assignment of cache segments
  • Rotational Vibration Compensation (RVC)-Monitors and corrects for external vibration

Atlas 10K V SAS Best-Fit:

  • Large Enterprise NAS/SAN Servers
  • Servers
  • Mainstream NAS/SAN
  • Workstations
  • Direct Attached JBOD Storage
  • Direct Attached RAID Storage
Height: 1.028 "
Storage Capacity: 147.1 GB
Width: 4 "
Drive Interface: SAS
Buffer: 16 MB
Weight (Approximate): 2 lb
Drive Interface Standard: 3Gb/s SAS
Product Name: Atlas 15K II SAS Hard Drive
Input Voltage: 5 V DC
Maximum External Data Transfer Rate: 300 MB/s
Drive Type: Internal
SAS Pin: 7-pin
Limited Warranty: 5 Year
Latency: 2 ms
Brand Name: Maxtor
Average Latency: 2 ms
Marketing Information:

The Maxtor Atlas 15K II SAS combines a 16MB cache, 98MB/s sustained data transfer rates and as fast as 3.4 msec seek times with the latest enterprise interface technology Serial Attached SCSI (SAS). Atlas 15K II drive seek times deliver the required IOPS (input/output per second) performance to support transactional and IO-intensive applications. Its sustained data rate makes it the ideal drive for high-bandwidth applications. Serial Attached SCSI brings together the best features of other enterprise interfaces to deliver higher system availability, scalability, end-user flexibility, performance and SCSI investment protection.
Product Type: Hard Drive
Bytes Per Sector: 512
Product Line: Atlas