| Weight (Approximate): |
0.17 lb
|
| Environmental Certification: |
RoHS
|
| Environmentally Friendly: |
Yes
|
| Product Name: |
SATA 6Gb/s 3i+1 SSD Hybrid PCIe
|
| Controller Type: |
Serial ATA/600
|
| Limited Warranty: |
5 Year
|
| Packaged Quantity: |
1
|
| Brand Name: |
SIIG
|
| Thickness: |
0.79 "
|
| RAID Supported: |
Yes
|
| Form Factor: |
Plug-in Card
|
| Package Contents: |
- SATA 6Gb/s 3i+1 SSD Hybrid PCIe
- 2 x SATA Data Cables
- 4 x Screws
- Driver/Software CD
- Installation Guide
|
| Additional Information: |
- Hybrid (HyperDuo) enables 80% of SSD performance at one-third the cost
- Supports Port Multiplier FIS-based and Native Command Queuing (NCQ)
- Supports TRIM to extend the life of SSDs for maximum durability
- HyperDuo mode supports Safe mode and Capacity mode
- 48-bit LBA mode with support up to 4TB hard disk capacity
- Works with the latest 6Gb/s SATA HDDs and backwards compatible with 3Gb/s & 1.5Gb/s HDDs
- Single Port Multiplier
|
| Marketing Information: |
SIIG’s SATA 6Gb/s 3i+1 SSD Hybrid PCIe adds 3 internal SATA 6Gb/s channels and 1 SATA SSD socket to your PCIe-equipped system. It is embedded with the fully-automated HyperDuo technology to enable SSD performance at 1/3 of the cost to work flawlessly with the leading 6Gb/s HDDs. This cost-effective hardware RAID (RAID 0, 1, 10) SATA host controller significantly enhances system performance by the capability of SSD acceleration to reduce system boot-up time and allows data to be stored on the high capacity of HDD data storage for cost saving.
|
| Product Type: |
SATA Controller
|
| Host Interface: |
PCI Express x2
|
| Total Number of SATA Ports: |
3
|
| Height: |
4.72 "
|
| RAID Levels: |
0, 1, 10
|
| Width: |
5.83 "
|
| Country of Origin: |
China
|
