SC-SA4R12 by SIIG, Inc

Image shown is a representation only.

Manufacturer SIIG, Inc
Manufacturer's Part Number SC-SA4R12
Description SIIG; Product Type: SATA Controller; Host Interface: PCI; Form Factor: Plug-in Card; RAID Supported: Yes; Additional Information: Regulatory approval(s): FCC Class B (DoC) & CE;
NAME DESCRIPTION
Data Transfer Rate: 150 MB/s
Certifications & Standards:
  • FCC: Class B (DoC)
  • CE
Product Name: Serial ATA 4-Channel RAID
Limited Warranty: 5 Year
Packaged Quantity: 1
Brand Name: SIIG
RAID Supported: Yes
Number of SATA Ports (Internal): 4
Form Factor: Plug-in Card
Package Contents:
  • Serial ATA 4-channel RAID
  • Four Serial ATA cables
  • Two Dual-connector SATA power cables
  • Two "Y" split power cables
  • Driver and utility software
  • User's manual
Additional Information:
  • Regulatory approval(s): FCC Class B (DoC) & CE
  • Port type: Four Serial ATA ports
  • Slot type: 32-bit PCI
  • Compliant with Serial ATA Specification, revision 1.0
  • Compliant with PCI Specification, revision 2.2
  • Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 0+1 (striping & mirroring)
  • Coexists with Ultra ATA controller and allows you to connect up to four Serial ATA hard disks
  • Features independent 256-byte FIFOs per channel for host reads and writes
  • Features Watch Dog timer for fault resiliency and flash memory for future BIOS updates
  • Supports 32-bit wide PCI bus at 66MHz data transfer rates up to 150 MB/s (1.5Gb/s)
  • Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
  • Four high quality SATA cables and two dual connector SATA power cables required for RAID configuration are included. Two "Y" split power cable is also included to provide extra power connection!
Marketing Information:
  • Increase data transfer rates & data security with SIIG Serial ATA RAID!
  • Supports RAID 0 (stripping), RAID 1(mirroring) and RAID 0+1 (striping & mirroring) for performance and reliability
  • Thin, flexible Serial ATA cables make it easier to route inside a PC
  • Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard drives
Product Type: SATA Controller
Host Interface: PCI
Maximum Data Transfer Rate: 150
System Requirements:
  • Pentium or equivalent PC with one available PCI slot
  • Windows 98SE/ME/NT4.0/2000/XP
Bootable: Yes
Total Number of SATA Ports: 4
RAID Levels: 0, 1, 0+1