SIIG, Inc - SC-SAT212

SC-SAT212 by SIIG, Inc

Image shown is a representation only.

Manufacturer	SIIG, Inc
Manufacturer's Part Number	SC-SAT212
Description	SIIG; Product Model: CN2504; Product Type: SATA Controller; Host Interface: PCI; Form Factor: Plug-in Card; Controller Type: Serial ATA/150;

SC-SAT212 Technical Details

NAME	DESCRIPTION
Data Transfer Rate:	150 MB/s
Number of Physical Drive Supported:	2
Certifications & Standards:	FCC Class B (DoC) CE
Product Name:	CN2504 Serial ATA PCI Adapter
Controller Type:	Serial ATA/150
Platform Supported:	PC
Limited Warranty:	5 Year
Brand Name:	SIIG
Number of SATA Ports (Internal):	2
Form Factor:	Plug-in Card
Package Contents:	CN2504 Serial ATA PCI Adapter Serial ATA cable Driver software SATA 15-pin power cable User's manual
Additional Information:	Features independent 256-byte FIFOs per channel for host reads and writes Features Watch Dog timer for fault resiliency and flash memory for future BIOS updates Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
Marketing Information:	Supports two Serial ATA hard disk drives with high-speed data transfer rates up to 150MB/sec The thin, flexible Serial ATA cable is easier to route inside a PC Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard disk drives
Product Type:	SATA Controller
Host Interface:	PCI
System Requirements:	Pentium or equivalent PC with one available PCI slot
Total Number of SATA Ports:	2
Product Model:	CN2504
Compatibility:	Supported Operating System: Windows 98 Windows 98SE Windows NT4.0 Windows ME Windows 2000 Windows XP

Popular Products

C0603C104K5RACAUTO

KEMET Corporation

KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

TM4C1294NCPDTI3

Texas Instruments

TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.

NC7WZ07P6X

Onsemi

The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.

LM358N

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

BAV99

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

1N4148

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;

EU2B-YS3103F

Idec

ROTARY SWITCH;

2N2222A

Telcom Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

LFXTAL025159REEL

Iqd Frequency Products

LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.